Optimization design of hydraulic performance in vaned mixed-flow pump
Authors:
- 14 November 2019
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 234 (7) , 934-946
Abstract
Vaned mixed-flow pump is widely used in industrial and agricultural cases. Considering mixed-flow impeller and space guide-vanes, the impeller and guide-vane blade angles need optimization design. In order to conduct optimization, the global dynamic-criterion algorithm with the ability of parallel running, dynamic criterion and escaping from local-best trap was used in this case. Based on numerical simulation and experimental verification, the 18 parameters' combination was optimized using this algorithm to achieve higher-efficiency in a specific flow rate range around the design condition. The numerical results showed that the weighted efficiency increased from 87.32% to 89.26% and the head coefficient decreased from 0.720 to 0.693. The improved efficiency and reduced head under design requirement helps to reduce the shaft power and energy consumption. The optimized blade inlet angle matches the inlet angle and improves the uniformity of flow in the impeller. The impeller outlet angle matches the guide vane inlet angle. Therefore, the flow regime becomes smoother in the rotor stator interaction region. The experimental results verify that the optimized pump efficiency was 85.75%. The measured head coefficient was 0.643 which meets the design requirement. This study provides a successful work for the green design of impeller and guide-vane of mixed-flow pump.Keywords
Funding Information
- National Natural Science Foundation of China (51836010, 51879265)
- National key research and development program (2018YFB0606103)
- China Postdoctoral Science Foundation (2018M640126)
This publication has 31 references indexed in Scilit:
- Automatic optimization of a centrifugal pump based on impeller–diffuser interactionProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2018
- A model-based design optimization strategy for ground source heat pump systems with integrated photovoltaic thermal collectorsApplied Energy, 2018
- Impact of Impeller Stagger Angles on Pressure Fluctuation for a Double-Suction Centrifugal PumpChinese Journal of Mechanical Engineering, 2018
- Experimental research on pressure fluctuation and vibration in a mixed flow pumpJournal of Mechanical Science and Technology, 2016
- Effects of meridional flow passage shape on hydraulic performance of mixed-flow pump impellersChinese Journal of Mechanical Engineering, 2013
- Unsteady Flow Analysis and Experimental Investigation of Axial-Flow PumpJournal of Hydrodynamics, 2010
- Numerical and Experimental Investigation of High-efficiency Axial-flow PumpChinese Journal of Mechanical Engineering, 2010
- Improving centrifugal pump efficiency by impeller trimmingDesalination, 2009
- Frequencies in the Vibration Induced by the Rotor Stator Interaction in a Centrifugal Pump TurbineJournal of Fluids Engineering, 2007
- Optimal analysis on the cyclic performance of a class of chemical pumpsApplied Energy, 2001