On the Coding of Chipless Tags
- 19 October 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 2 (4) , 170-184
Abstract
It is believed that chipless tags, often printable, will play a fundamental role for RFID technology to replace the currently widely used barcode technology. An application scenario of chipless tags that raises concerns is that the object attached with a chipless tag can be bent and even folded or crumbled. In this case, it is very difficult to identify the tag identity (ID) since some peaks or notches, which reflect the information encoded in the tag ID, in the radar cross section of the tag may disappear. In this paper, we propose to insert some error-correcting bits to the code of tag ID to improve the reliability of identifying chipless tag IDs. An error-detection channel model for dealing with this problem is developed. It is found that the channel model is asymmetric. Several error-correcting codes, namely Golay, BCH, and majority-rule-based multiple interrogations, are proposed to apply to the chipless tag encoding/decoding problem. Some performance indices of these codes, namely successful reading rate and expected successful interrogation times, are analyzed. The asymmetric property of the channel model entails the performance analysis to be conducted in a different way from the literature. Numerical and simulation results are presented to show the effectiveness of the proposed methods.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (SFB/TRR 196 MARIE-Project S04)
- DFG Project “Flexible Radio Frequency Identification Tags and System (FlexID)” (KA 1154/36-1)
- INTERREG-Programms Deutschland–Nederland through the Project “Druckbare RFID-Tags für Massenmärkte (DruIDe)” (34 INTERREG A 143078)
This publication has 19 references indexed in Scilit:
- Toward RCS Magnitude Level Coding for Chipless RFIDIEEE Transactions on Microwave Theory and Techniques, 2016
- Bending and Folding Effect Study of Flexible Fully Printed and Late-Stage Codified Octagonal Chipless RFID TagsIEEE Transactions on Antennas and Propagation, 2016
- Improvement in Robustness and Recognizability of RCS Response of U-Shaped Strip-Based Chipless RFID TagsIEEE Antennas and Wireless Propagation Letters, 2016
- 3.56-bits/cm Compact Inkjet Printed and Application Specific Chipless RFID TagIEEE Antennas and Wireless Propagation Letters, 2015
- Novel notch modulation algorithm for enhancing the chipless RFID tags coding capacity2015
- Novel Pseudo-Noise coded chipless RFID system for clutter removal and tag detection2015
- Fully Printable Chipless RFID Tag2011
- Multiresonator-Based Chipless RFID System for Low-Cost Item TrackingIEEE Transactions on Microwave Theory and Techniques, 2009
- Multipath fading measurements for multi-antenna backscatter RFID at 5.8 GHz2009
- Performance degradation of RFID system due to the distortion in RFID tag antenna2002