Effects of Liquid Contaminants on Heat Seal Strength of low‐density polyethylene Film
Authors:
- 16 September 2011
- journal article
- research article
- Published by Wiley in Packaging Technology and Science
- Vol. 25 (5) , 271-284
Abstract
Heat sealing is commonly applied for making form‐fill‐seal packages fabricated from thermoplastic films. One of the challenges frequently faced by the industry is inadvertent contamination of film–film interface by the product during filling, which can compromise package seal strength. In this study, the effects of dwell time (0.5–1.5 s), jaw pressure (28–1860 kPa), jaw configuration (narrow versus wide contact area) and jaw temperature (150°C–180°C) on the interface temperature and seal strength of a linear low‐density polyethylene (LLDPE) film were investigated. Three different film–film interface conditions were studied: (1) no contaminant; (2) with water contaminant; and (3) with vegetable oil contaminant. In the presence of liquid contaminant, jaw pressure played an important role in displacing the liquid from the seal area to form intact seals. Short dwell time (0.3 s) and low jaw temperature (150°C) was not favourable for forming intact seals in both water‐contaminated and vegetable oil‐contaminated films. The optimum jaw temperature and dwell time required to produce intact seals for oil contaminated films was 180°C and 0.3 s, respectively, whereas a combination of 165°C jaw temperature and 1 s dwell time was required to form intact seals for water‐contaminated films. Within the experimental conditions investigated, interface temperatures of 130°C–140°C resulted in the most optimum seal strength for both water‐contaminated and clean film specimens. Above 140°C, a weakening of seal strength was observed, presumably because of the change in melt flow characteristics and possible initiation of thermal degradation of the polymer. Copyright © 2011 John Wiley & Sons, Ltd.Keywords
This publication has 31 references indexed in Scilit:
- Heat Sealing measurement by an innovative techniquePackaging Technology and Science, 2006
- Effect of heat‐sealing temperature on the properties of OPP/CPP heat seals. Part II. Crystallinity and thermomechanical propertiesJournal of Applied Polymer Science, 2005
- Predicting the Heat Seal Performance of Ionomer FilmsJournal of Plastic Film & Sheeting, 2002
- Heat sealing of LLDPE: relationships to melting and interdiffusionJournal of Applied Polymer Science, 1998
- Evaluation of jaw profile on heat sealing performance of metallised flexible packagesPackaging Technology and Science, 1996
- Molecular shape dependent model of self-diffusion in, and the viscosity of, large molecule liquid systems. 2. Viscosity, temperature, and pressure relationships for model liquid hydrocarbonsJournal of the American Chemical Society, 1992
- Heatsealability of Flexible Web Materials in Hot-Bar Sealing ApplicationsJournal of Plastic Film & Sheeting, 1989
- Solvent diffusion in molten polyethyleneJournal of Applied Polymer Science, 1982
- Adhesion to polyethylene and polypropylenePolymer, 1981
- Adhesiveness of polyethylene mixturesJournal of Applied Polymer Science, 1963