Height-Constrained Planimetric Geolocation Error Compensation for Elevation Refinement After InSAR-DSM Block Adjustment
- 3 September 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-17
Abstract
Large-scale accurate digital surface model (DSM) generation is a key application of interferometric synthetic aperture radar (InSAR). Further refining the elevation by compensating the planimetric geolocation error after InSAR-DSM block adjustment remains challenging. To address this, a compensation method leveraging readily available elevation data was proposed. Relative offsets between the two DSMs were transformed into offsets relative to the reference DSM, followed by enhanced DSM mosaicking. For the first time, an optimization method was integrated with statistical adjustment (SA) for absolute offset determination. Experiments with TanDEM-X InSAR datasets near Guangzhou, China, demonstrate that (1) the Hybrid norm was identified as the optimal objective function, achieving the highest accuracy (total bias RMSE: 0.005 pixel) when combined with SA. (2) Incorporating InSAR quality parameters and border handling enhanced fusion accuracy, while sorting DSMs by ascending Euclidean distance significantly reduced memory usage. (3) The 90% relative elevation bias in along-track DSM overlaps was reduced to 1.51 m (an 82% improvement). The terrain-related elevation bias was corrected, yielding a mean and RMSE of 0.09 m and 3.18 m, respectively. The compensable offset range was approximately 0.001–123 pixels. These results demonstrate the effectiveness and applicability of the proposed method.Keywords
Funding Information
- National Natural Science Foundation of China (42330112)
- science and technology innovation Program of Hunan Province (2023SK2012)
- Hunan Provincial Innovation Foundation for Postgraduate (CX20220194)
- Fundamental Research Funds for the Central Universities of Central South University (2022zzts0106)
- China Scholarship Council (202406370179)
This publication has 54 references indexed in Scilit:
- Enriched Krylov subspace method for resolving interferometric parameter block adjustment model in elevation calibration of spaceborne InSAR digital surface modelJournal of Geodesy, 2025
- The ATL08 land and vegetation product for the ICESat-2 MissionRemote Sensing of Environment, 2019
- Accuracy assessment of the global TanDEM-X Digital Elevation Model with GPS dataISPRS Journal of Photogrammetry and Remote Sensing, 2018
- Generation and performance assessment of the global TanDEM-X digital elevation modelISPRS Journal of Photogrammetry and Remote Sensing, 2017
- An automated, open-source pipeline for mass production of digital elevation models (DEMs) from very-high-resolution commercial stereo satellite imageryISPRS Journal of Photogrammetry and Remote Sensing, 2016
- Relative height error analysis of TanDEM-X elevation dataISPRS Journal of Photogrammetry and Remote Sensing, 2012
- TanDEM-X calibrated Raw DEM generationISPRS Journal of Photogrammetry and Remote Sensing, 2012
- Operational TanDEM-X DEM calibration and first validation resultsISPRS Journal of Photogrammetry and Remote Sensing, 2012
- SPOT5-HRS digital elevation models and the monitoring of glacier elevation changes in North-West Canada and South-East AlaskaRemote Sensing of Environment, 2008
- The impact of misregistration on SRTM and DEM image differencesRemote Sensing of Environment, 2008