Analysis of equilibrium shift in isothermal reactors with a permselective wall
Authors:
- 1 September 1988
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 34 (9) , 1493-1503
Abstract
The objective of this study is to obtain a fundamental understanding of the behavior of reactors with a permselective wall (membrane reactors) in terms of: design parameters (reactor length, membrane thickness); operating variables (pressure ratio, feed flow rate); physical properties (rate constant, permeability of fast gas, permselectivity, equilibrium constant); and flow patterns (recycle, cocurrent, countercurrent). Pure feed reacts on the high‐pressure side of the membrane, and the product(s) formed are continuously removed to the low‐pressure side so that thermodynamic equilibrium is never reached. It is shown by simulation that equilibrium shift can be enhanced by: recycling unconverted reactant; shifting feed location to separate products; and maintaining high permeation rates to reduce backreaction. It is also shown that the choice between cocurrent flow and countercurrent flow depends on the system parameters.Keywords
This publication has 25 references indexed in Scilit:
- A membrane reactor using palladiumAIChE Journal, 1987
- Analysis of a cocurrent membrane reactorAIChE Journal, 1986
- The continuous membrane columnAIChE Journal, 1980
- Hydrolysis of starch in a membrane reactorBiotechnology and Bioengineering, 1977
- An examination of the adaptive random search techniqueAIChE Journal, 1976
- A “free volume” model of permeation of gas and liquid mixtures through polymeric membranesChemical Engineering Science, 1975
- Optimization by direct search and systematic reduction of the size of search regionAIChE Journal, 1973
- Multiphase catalysis. II. Hollow fiber catalystsBiotechnology and Bioengineering, 1971
- A note on isothermal permeable wall plug flow reactorChemical Engineering Science, 1970
- Dehydrogenation of cyclohexane on a hydrogen-porous membraneJournal of Catalysis, 1968