Aggregate Gradation Variation on the Properties of Asphalt Mixtures
Open Access
Abstract
National highway projects present a crucial role in economic growth, as they have a great influence on the national income. Therefore, the decision makers plan to construct these projects at a rapid rate. To achieve the just aforesaid, the utilization of asphalt of adequate quality and gradation is essential. The key problem which lies in recent decades is that many types of asphalt mixtures are rejected and reconstructed in the site due to the gradation variation of aggregates in the asphalt mixture which waste raw materials, cost and time. Thus, this research seeks to assess the possibility of accepting asphalt mixes with aggregates gradation variation (within the range from +4% above the upper specification limit to −2% below the lower specification limit). A wearing surface mix with gradation 3B was prepared according to the Egyptian code. The gradation variation was presented as the aggregate gradation is out of the specification limits during Hot Mix Asphalt (HMA) production. The aggregate gradations lie above and below the upper and lower specification limits, respectively, by ±2%, ±4% and ±6%. The design gradation of the control mix was included as a reference case. The different mix properties were measured using the Marshall Mix design method. Then, the performance of HMA mixes was evaluated under the effects of high temperature and water cycles through applying wheel loading tracking and Indirect Tensile Strength (ITS) tests. The results show that the 3B mixes with a gradation within a range of +4% to −2% of the upper and lower specification limits recorded the lowest rutting depth and the highest water damage resistance in hot regions compared to ordinary asphalt mixes. In summary, the new aggregate gradation limits will provide a reference for the design of asphalt mixture in hot climate regions.Keywords
This publication has 20 references indexed in Scilit:
- Study on interfacial debonding between bitumen and aggregate based on micromechanical damage modelInternational Journal of Pavement Engineering, 2020
- Influence of gradation on asphalt mix rutting resistance measured by Hamburg Wheel Tracking testConstruction and Building Materials, 2020
- Mechanical evaluation of aggregate gradation to characterize load carrying capacity and rutting resistance of asphalt mixturesConstruction and Building Materials, 2019
- Effect of using various waste materials as mineral filler on the properties of asphalt mixInnovative Infrastructure Solutions, 2018
- Performance of nanoceramic powder on the chemical and physical properties of bitumenConstruction and Building Materials, 2017
- Influence of Aggregate Gradation on Clogging Characteristics of Porous Asphalt MixturesJournal of Materials in Civil Engineering, 2014
- Effects of Aggregate Gradation on the Physical Properties of Semiflexible PavementAdvances in Materials Science and Engineering, 2014
- Effect of Aggregate Gradation on Rutting of Asphalt PavementsProcedia - Social and Behavioral Sciences, 2012
- Evaluation of Laboratory, Construction, and Performance Variability by Bootstrapping and Monte Carlo Methods for Rutting Performance Prediction of Heavy Vehicle Simulator Test SectionsJournal of Transportation Engineering, 2011
- Effect of aggregate properties on asphalt mixtures stripping and creep behaviorConstruction and Building Materials, 2007