Estimating CPT Parameters at Unsampled Locations Based on Kriging Interpolation Method
Open Access
- 29 November 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (23) , 11264
Abstract
The cone penetrometer test (CPT) has been widely used in geotechnical investigations. However, how to use the limited CPT data to reasonably predict the soil parameters of the unsampled regions remains a challenge. In the present study, we adopted the Kriging method to obtain the CPT data of an unsampled location in Adelaide, South Australia, based on the collected CPT data from six soundings around this location. Interpolation results showed that the trend of the estimated parameters is consistent with the trend of parameters of the surrounding points. From the Kriging interpolation result, we further carried out axial bearing capacity calculation of a precast concrete pile using the CPT-based direct method to verify the reliability of the method. The calculated bearing capacity of the pile is 99.6 kN which is very close to the true value of 102.8 kN. Our results demonstrated the effectiveness of the Kriging method in considering the soil spatial variability and predicting soil parameters, which is quite suitable for the application in engineering practice.Keywords
This publication has 16 references indexed in Scilit:
- Investigation of the reduction in uncertainty due to soil variability when conditioning a random field using KrigingGéotechnique Letters, 2012
- Reliability assessment of CPTU-based pile capacity predictions in soft clay depositsEngineering Geology, 2012
- Assessment of Direct Cone Penetration Test Methods for Predicting the Ultimate Capacity of Friction Driven PilesJournal of Geotechnical and Geoenvironmental Engineering, 2004
- Pile capacity by direct CPT and CPTu methods applied to 102 case historiesCanadian Geotechnical Journal, 1997
- A geostatistical study of soil data from an irrigated vineyard near Waikerie, South AustraliaEnvironment International, 1995
- Characterizing spatial variability of a clay by geostatisticsCanadian Geotechnical Journal, 1995
- An analytical study of the cone penetration test in clayGéotechnique, 1991
- Modelling spatial variability of soil parametersCanadian Geotechnical Journal, 1990
- Soil classification using the cone penetration testCanadian Geotechnical Journal, 1990
- Cone penetration testing in deltaic soilsCanadian Geotechnical Journal, 1983