Determination of the stress-strain curve in specimens of Scots pine for numerical simulation of defect free beams
Authors:
- V. BañoVBV. Baño
- R. Argüelles-BustilloRAR. Argüelles-Bustillo
- R. RegueiraRRR. Regueira
- M. GuaitaM. Guaita
Open Access
- 30 June 2012
- journal article
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 62 (306) , 269-284
Abstract
The objective of this paper is to develop a twodimensional numerical model to simulate the response of Scots pine (Pinus sylvestris L.) defect free timber members in order to predict the behaviour of these members when subjected to external forces. For this purpose, data of the mechanical properties of Scots pine were obtained by performing experimental tests on specimens. We determined the stresses and deformations of timber beams in the elastic-plastic and plastic phases. In addition, we developed a finite element software that considered the orthotropic nature of timber, the non-linearity of the compression-reduction branch and the differing moduli of elasticity in tension and compression for Scots pine beams free from defects. The software developed simulates an experimental four point bending test according to UNE-EN 408 Standard.Keywords
This publication has 8 references indexed in Scilit:
- Numerical simulation of framed joints in sawn-timber roof trussesSpanish Journal of Agricultural Research, 2008
- Morphological lattice models for the simulation of softwood failure and fractureHolzforschung, 2007
- Elastic layer model for application to crack propagation problems in timber engineeringWood Science and Technology, 2005
- Coupled experiments and simulations of microstructural damage in woodExperimental Mechanics, 2002
- Finite-Element Analysis of the Stress Distribution in a Torsion Test of Full-Size, Structural LumberJournal of Testing and Evaluation, 2002
- Viscoelastic crack growth process in wood timbers: An approach by the finite element method for mode I fractureInternational Journal of Fracture, 2002
- Failure modeling of sawn lumber with a fastener holeFinite Elements in Analysis and Design, 2000
- Fracture in spruce: experiment and numerical analysis by linear and non linear fracture mechanicsEuropean Journal of Wood and Wood Products, 1999