Influence of Heat Treatment on the Microstructure and Tensile Properties of a Novel Nitrogenous Nickel-Based Deposited Metal
Open Access
Abstract
Nitrogenous nickel-based deposited metal was prepared by using the gas metal arc welding (GMAW) method, and it was further subjected to solid-solution and aging heat treatment. The influence of different solid-solution temperatures on the microstructure of the deposited metal was studied, and the complete heat treatment system for the nitrogenous nickel-based deposited metal was ultimately determined. The microstructure, mechanical properties, and deformation mechanism of the nitrogenous nickel-based deposited metal in two states (as-prepared state and complete heat-treated state) were finally investigated. The results show that the microstructure of the deposited metal mainly consisted of epitaxially grown columnar grains with large grains. Petal-like Laves phases formed between the dendrites. The main deformation mechanism was the unit dislocation a/2 cut precipitation phase. After a complete heat treatment, all the Laves phases were re-melted, and nanoscale M(C,N) phases precipitated in the grains, while M23C6 phases formed at the grain boundaries. The samples showed higher yield and ultimate tensile strengths than those of the as-prepared state metal, but with reduced ductility. The deformation mechanism involved not only a/2 matrix dislocations cutting the precipitated phase, but also two a/6 Shockley incomplete dislocations, together cutting the precipitated phase to form a stacking layer dislocation.Keywords
This publication has 45 references indexed in Scilit:
- Eutectic precipitates and microstructure of electroslag remelted 15Cr–22Ni austenitic heat-resistant steel with varying Nb contentsJournal of Iron and Steel Research International, 2022
- On the Optimization of the Microstructural and Mechanical Properties of Model Ni-Based Superalloys Through the Alloying Effects of Refractory Mo and W ElementsMetallurgical and Materials Transactions A, 2022
- Primary creep in single crystal superalloys: Origins, mechanisms and effectsActa Materialia, 2007
- M23C6 precipitation behavior in a Ni-base superalloy M963Journal of Materials Science, 2005
- Investigation of creep deformation mechanisms at intermediate temperatures in René 88 DTActa Materialia, 2005
- Creep behaviour of Ni-base single-crystal superalloys with various γ′ volume fractionActa Materialia, 2004
- Tensile behavior of a new single-crystal nickel-based superalloy (CMSX-4) at room and elevated temperaturesJournal of Materials Engineering and Performance, 1994
- Some aspects of the precipitation of metastable intermetallic phases in INCONEL 718Metallurgical Transactions A, 1992
- Influence of the co/ni ratio on the γ and γ" precipitation in fe-ni-co-ta alloysMetallurgical Transactions, 1974
- Some effects of hafnium additions on the mechanical properties of a columnar-grained nickel-base superalloyJOM, 1971