Study on Surface Modification of Fe–Si–Cr Alloy by Selective Oxidation Heat Treatment and its Corrosion Properties
Authors:
- 3 July 2022
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 94 (2)
Abstract
Corrosion properties of the insulating oxide layer formed on the Fe–Si–Cr alloy through the selective oxidation heat treatment are evaluated to find out that the oxide layer can play a role as a barrier layer against corrosion. Preferential oxidation of Si and Cr during the selective oxidation heat treatment results in a two‐layered oxide layer. From the X‐ray photoelectron spectroscopy and transmission electron microscope results, it is revealed that the inner layer is SiO2 and the outer layer is Cr2O3, and they keep growing with the heat treatment time. The oxide layer formed by the selective oxidation heat treatment causes the ennoblement of the corrosion potential, but additional ennoblement does not occur with the growth of the oxide layer. However, the thickness of the oxide layer influences anti‐corrosion performance in terms of corrosion resistance and deterioration. The thicker the oxide layer is, the higher the corrosion resistance and the slower the deterioration become so that the protection property withstands for 3 h in the 3.5 wt% NaCl solution when the oxide layer has 44.3 nm thickness.Keywords
Funding Information
- Korea Institute of Industrial Technology (KITECH JB-22-0008)
- National Research Foundation of Korea (NRF-2019M3E6A1103910, NRF-2019M3D1A1079227)
This publication has 52 references indexed in Scilit:
- A facile and novel approach to magnetic Fe@SiO 2 and FeSi 2 @SiO 2 nanoparticlesJournal of Materials Chemistry, 2011
- Effect of carbon content on microstructure and corrosion behavior of hypereutectic Fe–Cr–C claddingsMaterials Chemistry and Physics, 2010
- Eddy current and total power loss separation in the iron–phosphate–polyepoxy soft magnetic compositesMaterials & Design (1980-2015), 2009
- Properties of iron-based soft magnetic composite with iron phosphate–silane insulation coatingJournal of Alloys and Compounds, 2009
- Soft magnetic composite materials (SMCs)Journal of Materials Processing Technology, 2007
- Effects of temperature on the corrosion behavior of 13Cr martensitic stainless steel during exposure to CO2 and Cl− environmentMaterials Letters, 2005
- Direct and alternating current magnetic properties of FeNi particles coated with SiO2Journal of Alloys and Compounds, 2004
- Corrosion performance of polypyrrole coating applied to low carbon steel by an electrochemical processElectrochimica Acta, 2000
- Electrochemical impedance spectroscopy as a tool for investigating underpaint corrosionElectrochimica Acta, 1996
- Electrochemical impedance spectroscopy (EIS) as a new tool for investigating methods of corrosion protectionElectrochimica Acta, 1990