GaN metal–semiconductor–metal ultraviolet photodetector with IrO2 Schottky contact
Authors:
- 9 December 2002
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 81 (24) , 4655-4657
Abstract
Iridium oxide was used as the Schottky barrier materials of GaN metal–semiconductor–metal (MSM) ultraviolet photodetector. Annealing an Ir contact at under ambient, the reverse leakage current density at reduced by the four orders of magnitude, to Simultaneously, Schottky barrier height and optical transmittance increased to 1.48 eV and 74.8% at 360 nm, respectively. The dramatic improvement originated from the formation of by the annealing, resulting in the increase in the responsivity of the GaN MSM photodetector by one order of magnitude, in comparison with the photodetector with Pt Schottky contact.
Keywords
This publication has 9 references indexed in Scilit:
- Low-noise GaN Schottky diodes on Si(111) by molecular beam epitaxyApplied Physics Letters, 2001
- Characterization of RuO2 electrodes on Zr silicate and ZrO2 dielectricsApplied Physics Letters, 2001
- SiO 2 -passivated lateral-geometry GaN transparent Schottky-barrier detectorsApplied Physics Letters, 2000
- Schottky barrier detectors on GaN for visible–blind ultraviolet detectionApplied Physics Letters, 1997
- Very low dark current metal–semiconductor–metal ultraviolet photodetectors fabricated on single-crystal GaN epitaxial layersApplied Physics Letters, 1997
- Reactive sputtering of RuO2 filmsThin Solid Films, 1989
- Perspective On Gallium NitrideMRS Proceedings, 1989
- Conducting Transition Metal Oxides: Possibilities for RuO2 in VLSI MetallizationJournal of the Electrochemical Society, 1988
- Electronic structure of , , andPhysical Review B, 1976