Full-Scale Highly-Loaded Wastewater Treatment Processes (A-Stage) to Increase Energy Production from Wastewater: Performance and Design Guidelines
- 1 August 2016
- journal article
- research article
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 33 (8) , 571-577
Abstract
Current practice of wastewater treatment does not recover the full potential of energy present in wastewater. The potential of using anammox bacteria for autotrophic nitrogen removal combined with a desire for energy optimization brings new attention to the A-stage technology for organic carbon harvesting from municipal wastewater. The goal of this research was to investigate operational conditions of four full-scale A-stage processes and gain insight in the optimal conditions to harvest the maximum amount of organics present in sewage as excess sludge from the A stage. Large differences in removal efficiencies and design aspects were found between the four operational A-stage processes in the Netherlands. Biochemical oxygen demand (BOD) removal efficiencies vary between 40% and 80%, indicating that a good removal efficiency is possible, but that local conditions or design can be very influential. An optimal solid retention time (SRT) for maximal sludge production of 0.3 days was found; a longer SRT resulted in more mineralization of the chemical oxygen demand (COD). SRT control might be an important design aspect for the optimization of A-stage process. A short contact time with a minimum of 15 min and sufficient aeration were found to be optimal for soluble COD removal. Iron addition aided the removal of colloidal/suspended COD by coagulation/flocculation. Sludge flocs formed in the A-stage process are weak and sensitive to anaerobic conditions as well as shear due to, for example, pumping. Besides a good design of the A-stage itself, the further processing of the produced sludge also needs careful attention to optimize the sludge production and energy production.Keywords
This publication has 9 references indexed in Scilit:
- High-rate activated sludge system for carbon management – Evaluation of crucial process mechanisms and design parametersWater Research, 2015
- Anticipating the next century of wastewater treatmentScience, 2014
- Working with energy and mass balances: a conceptual framework to understand the limits of municipal wastewater treatmentWater Science & Technology, 2013
- Domestic Wastewater Treatment as a Net Energy Producer–Can This be Achieved?Environmental Science & Technology, 2011
- Redesigning wastewater infrastructure to improve resource efficiencyWater Science & Technology, 2011
- Sewage Treatment with AnammoxScience, 2010
- The effect of low sludge age on wastewater fractionation (SS, SI)Water Science & Technology, 2003
- Environmental Impacts of Nutrient Removal Processes: Case StudyJournal of Environmental Engineering, 1997
- The A–B Process: A Novel two Stage Wastewater Treatment SystemWater Science & Technology, 1985