Investigation of deformation and heat treatment effects on properties of PM 92.5W–5Ni–2.5Fe heavy alloys
Authors:
- B. KatavićBKB. Katavić
- Z. OdanovićZOZ. Odanović
- 1 March 2004
- journal article
- Published by SAGE Publications in Powder Metallurgy
- Vol. 47 (2) , 191-199
Abstract
This paper presents the effects of vacuum heat treatment under different cooling conditions on mechanical and structural properties of forged heavy alloys, such as 92.5W–5Ni–2.5Fe and 92.5W–5Ni–25Fe microalloyed with Co. The tungsten composition in the c phase has proved to be higher and more homogenous in the rapidly cooled alloys than in the slowly cooled ones. The effects of chemical composition inhomogeneity on mechanical and structural properties of alloys were also analysed and discussed. The results of tensile and toughness testing have shown an increase in ductility and toughness, while the strength of heat treated alloys decreased in comparison with the strength of forged alloys. The fracture analysis has shown that in the sintered and rotary forged alloys, intergranular fracture of the tungsten phase and transgranular fracture of the γ phase occurred, respectively. The fracture of these phases after heat treatment was characterised by transgranular morphology.Keywords
This publication has 11 references indexed in Scilit:
- The cause of matrix penetration of W/W grain boundaries during heat treatment of W-Ni-Fe heavy alloyMetallurgical and Materials Transactions A, 1994
- Matrix Penetration of W/W Grain Boundaries and Its Effect on Mechanical Properties of 93W-5.6Ni-1.4Fe Heavy AlloyMetallurgical Transactions A, 1993
- Matrix and interfacial precipitation in the W-Ni-Fe systemMetallurgical Transactions A, 1986
- Precipitation at Tungsten/Tungsten Interfaces in Tungsten–Nickel–Iron Heavy AlloysPowder Metallurgy, 1986
- Precipitation in a liquid phase sintered WNiFe alloyActa Metallurgica, 1985
- Interphase boundary precipitation in liquid phase sintered W-Ni-Fe and W-Ni-Cu alloysMetallurgical Transactions A, 1984
- Segregation to interphase boundaries in liquid-phase sintered tungsten alloysMetallurgical Transactions A, 1983
- Hydrogen-assisted fracture in single-phase nickel alloysScripta Metallurgica, 1982
- Effect of heat treatment on the distribution of elements in the phase components of a W-Ni-Fe alloyPowder Metallurgy and Metal Ceramics, 1982
- Pore Formation and Its Effect on Mechanical Properties in W—Ni—Fe Heavy AlloyPowder Metallurgy, 1979