Conversion synthesis of manganese sulfate residue into iron hydroxide adsorbent for Cu(II) removal from aqueous solution
Authors:
- 16 April 2020
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (19) , 23871-23879
Abstract
Manganese sulfate residue (MSR) is a by-product derived from the manganese sulfate production process. In this study, an iron hydroxide adsorbent was prepared from MSR using the hydrothermal conversion method. The adsorbent was characterized and used to remove copper(II) ions from aqueous solution. Batch experiments were performed to investigate the adsorption efficiency of copper ions at different contact times, initial concentrations, solution pH levels, and reaction temperatures. Adsorption equilibrium was observed in 3 h, and the best pH was under natural conditions (pH ∼ 5.5). Increasing the initial Cu2+ concentration and reaction temperature can increase the adsorption quantity. The adsorption capacity of iron hydroxide at an initial concentration of 50 mg L−1 was 14.515 mg g−1 Cu(II) under the conditions of a nature pH and room temperature. According to the adsorption data, the pseudo-second-order model can describe the adsorption kinetics of copper ions well, and the Freundlich model provides an excellent fit to the adsorption isotherm. XRD and FTIR were applied to characterize the raw materials and adsorbents to reveal the adsorption mechanism. The results suggest that the adsorbent converted from MSR is a promising material for the removal of Cu(II) in aqueous solutions.Keywords
Funding Information
- National Natural Science Foundation of China (U1812402; 41972048)
- National Key Research and Development Program of China (2018YFC1903500)
- Guizhou Provincial Science and Technology Foundation ([2016]1155)
This publication has 43 references indexed in Scilit:
- Adsorption of ammonia nitrogen in low temperature domestic wastewater by modification bentoniteJournal of Cleaner Production, 2019
- Mussel-inspired preparation of layered double hydroxides based polymer composites for removal of copper ionsJournal of Colloid and Interface Science, 2019
- Crumpled graphene balls as rapid and efficient adsorbents for removal of copper ionsJournal of Colloid and Interface Science, 2018
- Adsorptive removal of phosphate from aqueous solutions using different types of red mudWater Science & Technology, 2018
- Binary adsorption of silver and copper on Verde-lodo bentonite: Kinetic and equilibrium studyApplied Clay Science, 2017
- Efficient removal of toxic bromothymol blue and methylene blue from wastewater by polyvinyl alcoholJournal of Molecular Liquids, 2016
- Optimization of adsorption conditions using central composite design for the removal of copper (II) and lead (II) by defatted papaya seedKarbala International Journal of Modern Science, 2016
- Rapid removal of uranium from aqueous solutions using magnetic Fe3O4@SiO2 composite particlesJournal of Environmental Radioactivity, 2012
- Removal of copper(II) using chitin/chitosan nano-hydroxyapatite compositeInternational Journal of Biological Macromolecules, 2011
- Spectroscopic study of the surface oxidation of mechanically activated sulphidesApplied Surface Science, 2002