Efficient separation of americium by a mixed solvent of two extractants, a diamideamine and a nitrilotriacetamide
Authors:
- 12 May 2023
- journal article
- research article
- Published by Springer Nature in Analytical Sciences
- Vol. 39 (8) , 1341-1348
Abstract
The Japan Atomic Energy Agency (JAEA) has proposed the Solvent Extraction from Liquid waste using Extractants of CHON-type for Transmutation (SELECT) process by solvent extraction as a new separation technology to recover minor actinides (MA) from high-level liquid waste (HLLW) produced by spent fuel reprocessing. The MA separation in the SELECT process comprises the recovery of MA and rare earths (RE) from HLLW, MA/RE separation, and Am/Cm separation. Three highly practical extractants are used in the MA separation. Furthermore, this flow configuration facilitates the preparation of nitric acid concentrations in the aqueous phase. However, the separation factor between Cm and Nd in the MA/RE separation is small (SFCm/Nd = 2.5), requiring many extraction stages for continuous extraction in a mixer settler. Therefore, this study investigated the separation of only Am from an aqueous nitric acid solution containing MA (Am and Cm) and RE using an organic phase mixed with two extractants alkyl diamideamine with 2-ethylhexyl alkyl chains (ADAAM(EH)) and hexa-n-octylnitrilotriacetamide (HONTA) used in the SELECT process. Under high-concentration nitric acid conditions, Am and La, Ce, Pr, Nd (light lanthanides) were extracted in the ADAAM(EH) + HONTA mixed solvent, whereas Cm, medium, and heavy lanthanides, and Y were partitioned in the aqueous phase. Subsequently, only light lanthanides could be back extracted from the ADAAM(EH) + HONTA mixture solvent containing Am and light lanthanides in low nitric acid concentrations. Furthermore, Am could be easily stripped with 0.2 M or 5 M nitric acid. This method does not require the mutual separation of Cm and Nd, which have low separation factors. Am can be efficiently separated by one extraction and two back extractions, reducing the number of steps in the SELECT process. Graphical abstractKeywords
This publication has 28 references indexed in Scilit:
- Utilizing electronic effects in the modulation of BTPhen ligands with respect to the partitioning of minor actinides from lanthanidesChemical Communications, 2013
- Novel Soft–Hard Donor Ligand, NTAamide, for Mutual Separation of Trivalent Actinoids and LanthanoidsChemistry Letters, 2013
- 2,6-Bis(5-(2,2-dimethylpropyl)-1H-pyrazol-3-yl)pyridine as a Ligand for Efficient Actinide(III)/Lanthanide(III) SeparationInorganic Chemistry, 2012
- Role of ADS in the back-end of the fuel cycle strategies and associated design activities: The case of JapanJournal of Nuclear Materials, 2011
- Mutual Separation of Actinides from Middle Lanthanides by the Combination of Two Neutral Donors, N,N,N′,N′-Tetraoctyl-3,6-dioxaoctanediamide and N,N,N′,N′-TetraethyldiglycolamideChemistry Letters, 2010
- Am/Eu Separation with a New Ligand,N,N,N′,N′-tetrakis((4-butoxypyridin-2-yl)methyl)ethylenediamine (TBPEN), a Hydrophobic Derivative of TPENJournal of Nuclear Science and Technology, 2010
- Demonstration of a SANEX Process in Centrifugal Contactors using the CyMe4‐BTBP Molecule on a Genuine Fuel SolutionSolvent Extraction and Ion Exchange, 2009
- Kinetics of Americium(III) Extraction and Back Extraction with BTPSolvent Extraction and Ion Exchange, 2006
- 6,6′‐Bis(5,5,8,8‐tetramethyl‐5,6,7,8‐tetrahydro‐benzo[1,2,4]triazin‐3‐yl) [2,2′]bipyridine, an Effective Extracting Agent for the Separation of Americium(III) and Curium(III) from the LanthanidesSolvent Extraction and Ion Exchange, 2006
- Solvent extraction for the chemical separations of the 5f elementsInorganica Chimica Acta, 1987