Effect of angular speed of cam on oil film variation in the line contact thermal EHL of a cam-tappet pair
Authors:
- 2 January 2020
- journal article
- research article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 72 (6) , 713-722
Abstract
Purpose: The influence of the cam angular speed on the pressure, film thickness and temperature profiles at some selected angular positions together with the oil characteristics are investigated. Design/methodology/approach: A high-order polynomial cam is used, and thermal elastohydrodynamic lubrication (EHL) calculations are carried out by the multi-grid method and line-line scanning technique. Findings: It is found that the film thickness decreases with a decrease in angular speed. The depth of the dimple that occurred in the reverse motion is also reduced because of the recession in the “temperature–viscosity wedge” effect. Originality/value: It is revealed that the reduction in the cam angular speed makes the classical big surface dimple evolve into a small centralized dimple during the opposite sliding motion. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2019-0327Keywords
This publication has 8 references indexed in Scilit:
- Thermal insulation effect on EHL of coated cam/tappet contact during start upIndustrial Lubrication and Tribology, 2018
- Enhancement of thermal effect in zero entrainment velocity contact under low surface velocityProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2016
- Transient Thermal Elastohydrodynamic Modeling of Cam–Follower Systems: Understanding PerformanceTribology Transactions, 2016
- Influence of temperature on cam-tappet lubrication in an internal combustion engineFrontiers of Mechanical Engineering in China, 2007
- A Numerical Analysis for TEHL of Eccentric-Tappet Pair Subjected to Transient LoadJournal of Tribology, 2003
- On the Theory of Thermal Elastohydrodynamic Lubrication at High Slide-Roll Ratios—Line Contact SolutionJournal of Tribology, 2000
- A Generalized Reynolds Equation for Non-Newtonian Thermal Elastohydrodynamic LubricationJournal of Tribology, 1990
- A Numerical Analysis for the Transient EHL Process of a Cam-Tappet Pair in I. C. EngineJournal of Tribology, 1989