Short-beam shear fatigue life assessment of thermally cycled carbon–aluminium laminates with protective glass interlayers
Open Access
- 11 March 2021
- journal article
- research article
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 21 (2) , 1-11
Abstract
Fibre metal laminates (FMLs) are attractive construction materials, especially for use in aerospace and transport facilities. Throughout their service life, thin-walled structures made of FMLs are exposed to static and dynamic loads, as well as corrosion and the unfavourable influence of environmental conditions. The paper presents an experimental analysis of the combined mechanical and environmental long-term behaviour of carbon-based fibre metal laminates and their variants with protective glass layers. The Al alloy/CFRP and Al alloy/GFRP/CFRP laminates in a 3/2 configuration were used. The tested laminates were subjected to 1500 thermal cycles with a temperature range of 130 °C. The static and fatigue interlaminar shear strengths were tested before and after thermal conditioning. It was shown that the stable stiffness reduction in the tested laminates was observed with increasing fatigue cycles, due to the progressive fatigue damage accumulation. The thermally cycled laminates feature slightly smoother stiffness loss, while a more rapid decrease was observed in thermally untreated laminates. Moreover, the fatigue life of the tested laminates subjected to thermal cycling revealed nine times fewer fatigue cycles of laminates with glass protectors after thermal cycles in comparison to the laminates not subjected to thermal cycling.Keywords
Funding Information
- Ministerstwo Nauki i Szkolnictwa Wyższego (030/RID/2018/19)
This publication has 44 references indexed in Scilit:
- On fatigue stress-cycle curves of carbon, glass and hybrid carbon/glass-reinforced fibre metal laminatesInternational Journal of Fatigue, 2020
- Fatigue delamination growth of carbon and glass reinforced fiber metal laminates in fracture mode IIInternational Journal of Fatigue, 2020
- Performance evaluation of CFRP/Al fibre metal laminates with different structural characteristicsComposite Structures, 2019
- Influence of structural characteristics on the interlaminar shear strength of CFRP/Al fibre metal laminatesProcedia Structural Integrity, 2019
- Analysis of CFRP/Al hybrid laminates flexural strengthProcedia Structural Integrity, 2019
- Short-beam shear fatigue behavior of fiber metal laminate (Glare)International Journal of Fatigue, 2017
- Interlaminar failure behavior of GLARE laminates under short-beam three-point-bending loadComposites Part B: Engineering, 2016
- Electrochemical characteristics of a carbon fibre composite and the associated galvanic effects with aluminium alloysApplied Surface Science, 2014
- Galvanic corrosion property of contacts between carbon fiber cloth materials and typical metal alloys in an aggressive environmentSurface and Coatings Technology, 2013
- A review: Fibre metal laminates, background, bonding types and applied test methodsMaterials & Design (1980-2015), 2011