High-Temperature Oxidation Resistance of PDC Coatings in Synthetic Air and Water Vapor Atmospheres
Open Access
Abstract
This work is aimed at the development and investigation of the oxidation behavior of ferritic stainless-steel grade AISI 441 and polymer-derived ceramic (PDC) protective coatings. Double-layer coatings of a PDC bond coat below a PDC top coat with glass and ceramic passive fillers’ oxidative resistance were studied at temperatures up to 1000 °C in a flow-through atmosphere of synthetic air and in air saturated with water vapor. Investigation of the oxide products formed at the surface of the samples in synthetic air and water vapor atmospheres, at different temperatures (900, 950, 1000 °C) and exposure times (24, 96 h) was carried out on both uncoated steel and steel coated with selected coatings by scanning electron microscopy (SEM) and X-Ray diffraction (XRD). The Fe, Cr2O3, TiO2, and spinel (Mn,Cr)3O4 phases were identified by XRD on oxidized steel substrates in both atmospheres. In the cases of the coated samples, m- ZrO2, c- ZrO2, YAG, and crystalline phases (Ba(AlSiO4)2–hexacelsian, celsian) were identified. Scratch tests performed on both coating compositions revealed strong adhesion after pyrolysis as well as after oxidation tests in both atmospheres. After testing in the water vapor atmosphere, Cr ions diffused through the bond coat, but no delamination of the coatings was observed.Keywords
This publication has 38 references indexed in Scilit:
- Ceramic Nanocomposites from Tailor-Made Preceramic PolymersNanomaterials, 2015
- Control of Surface Energy of Silicon Oxynitride FilmsLangmuir, 2013
- Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced CeramicsJournal of the American Ceramic Society, 2010
- Corrosion protection of stainless steel by polysiloxane hybrid coatings prepared using the sol–gel processSurface and Coatings Technology, 2010
- Advanced coatings on the basis of Si(C)N precursors for protection of steel against oxidationJournal of the European Ceramic Society, 2009
- Processing of Polymer‐Derived Ceramic Composite Coatings on SteelJournal of the American Ceramic Society, 2007
- Development of PE-CVD Si/C/N:H films for tribological and corrosive complex-load conditionsSurface and Coatings Technology, 2005
- Investigations on hardness of rf sputter deposited SiCN thin filmsMaterials Science and Engineering: A, 2004
- Sol-Gel-Derived Hybrid Coatings for Corrosion ProtectionJournal of Sol-Gel Science and Technology, 2003
- Synthesis of Silicon Carbide Thin Films with Polycarbosilane (PCS)Journal of the American Ceramic Society, 1997