PtTiO[sub x]/C Electrocatalysts with Improved Durability in H[sub 2]/O[sub 2] PEMFCs without External Humidification
Authors:
- 1 January 2008
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 155 (2) , B187-B193
Abstract
In the present investigation, PtTiOx/C-500PtTiOx/C-500 –Ar electrocatalyst with excellent durability and the ability of water retention was prepared and characterized. Through transmission electron microscopy, PtTiOx/C-500PtTiOx/C-500 –Ar electrocatalyst was observed to exhibit good particle size preservation during thermal treatment and durability testing. The combined results from single cell durability testing, scanning electron microscopy, electrochemical surface area of the electrocatalyst, and tests designed to inspect the variation of internal resistance, as well as performance of the fuel cell, demonstrated that fuel cell performance degradation was mainly caused by the increase of fuel cell internal resistance due to the hydrophilicity change of the membrane and the loss of electrochemical surface area in cathode electrocatalyst. The results also indicated that by using PtTiOx/C-500PtTiOx/C-500 –Ar as both cathode and anode electrocatalysts, the single cell could be stably operated with dry gases without any external humidification. The PtTiOx/C-500PtTiOx/C-500 –Ar electrocatalyst exhibited excellent durability during 518 h testing. These results imply that titanium oxide plays an important role in increasing the uptake of water and serving as an anchor for the adjacent platinum particles to prevent Pt particles from agglomeration and coalescence during the thermal treatment and durability testing.Keywords
This publication has 33 references indexed in Scilit:
- The stability of Pt–M (M=first row transition metal) alloy catalysts and its effect on the activity in low temperature fuel cellsJournal of Power Sources, 2006
- PEM fuel cells: status and challenges for commercial stationary power applicationsJOM, 2006
- Water Management in PEMFCs Using Absorbent WicksJournal of the Electrochemical Society, 2004
- Electrocatalytic Corrosion of Carbon Support in PEMFC CathodesElectrochemical and Solid-State Letters, 2004
- Catalyst Microstructure Examination of PEMFC Membrane Electrode Assemblies vs. TimeJournal of the Electrochemical Society, 2004
- Kinetic Model of Platinum Dissolution in PEMFCsJournal of the Electrochemical Society, 2003
- Technical Challenges for Fuel Cells in Mobile ApplicationsFuel Cells, 2002
- Fuel cells for portable applicationsJournal of Power Sources, 2002
- Materials for fuel-cell technologiesNature, 2001
- Operating Proton Exchange Membrane Fuel Cells Without External Humidification of the Reactant Gases: Fundamental AspectsJournal of the Electrochemical Society, 1997