Effect of welding time on microstructure and tensile shear load in resistance spot welded joints of AZ31 Mg alloy
Authors:
- Y.R. WangYWY.R. Wang
- Z.H. MoZMZ.H. Mo
- J.C. FengJFJ.C. Feng
- Z.D. ZhangZZZ.D. Zhang
- 1 November 2007
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 12 (8) , 671-676
Abstract
Magnesium alloys are becoming widely recognised as the candidates to replace steel and aluminium alloys, especially in automotive industries and thereby they have potential to be widely used. In the present paper, resistance spot welding (RSW) was performed on 1 mm thick AZ31B magnesium alloy sheets. The effect of welding time on the microstructure and tensile shear load was investigated. Some interesting characteristics for nugget growth were observed during the RSW of Mg alloy. The nuggets were initiated in the first cycle, grown rapidly in the following 2–4 cycles and reached a plateau after around 6 cycles. The microstructure of the nugget consisted of non-equilibrium a -phase dendrites surrounded by a certain amount of β -Mg17 Al12 precipitated in the grain boundaries. With increased welding time, the size and shape of grains in the nugget would be more uniform and the width of corona bonds would be larger. Tensile shear tests showed that the tensile shear load of the joints increased with increasing welding time when the welding time was, <10 cycles. The maximum tensile shear load is up to 1980 N.Keywords
This publication has 11 references indexed in Scilit:
- Microstructure characteristics of resistance spot welds of AZ31 Mg alloyScience and Technology of Welding and Joining, 2006
- Nugget growth characteristic for AZ31B magnesium alloy during resistance spot weldingScience and Technology of Welding and Joining, 2006
- Peak temperatures and microstructures in aluminium and magnesium alloy friction stir spot weldsScience and Technology of Welding and Joining, 2005
- On the resistance spot weldability of galvanized interstitial free steel sheets with austenitic stainless steel sheetsJournal of Materials Processing Technology, 2004
- Review of resistance spot welding of steel sheets Part 1 Modelling and control of weld nugget formationInternational Materials Reviews, 2004
- Weld growth mechanism of resistance spot welds in zinc coated steelJournal of Materials Processing Technology, 2003
- Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloysScripta Materialia, 2003
- Issues that Influence Magnesium's Use in the Automotive IndustryMaterials Science Forum, 2003
- MagnesiumMaterials Science and Engineering: A, 2001
- Magnesium castings for automotive applicationsJOM, 1995