Microstructure and properties of graphite/copper composites fabricated with Cu-Ni double-layer coated graphite powders
Authors:
- 19 July 2019
- journal article
- research article
- Published by Taylor & Francis in Composite Interfaces
- Vol. 27 (5) , 449-463
Abstract
In this paper, graphite/copper composites with high performance were fabricated by a novel two-steps electroless plating and spark plasma sintering. The interfacial characterization and modification mechanism of nickel coating in the composites were analyzed. Effects of sintering temperature and Ni volume fraction on the mechanical properties and microstructure of composites were also systematically investigated. The results showed that the introduction of Ni coating could significantly improve the interfacial bonding between Cu matrix and graphite and led to the uniform distribution of graphite particles in Cu matrix. Moreover, the mechanical properties of composites increased obviously with the increase of Ni coating content from 0 vol.% to 10 vol.%. When the Ni content was 10 vol. %, the relative density, hardness, and compressive strength of the composites reached to 99.8%, 67.8 HB and 314 MPa, respectively. Graphical abstract Graphical abstractKeywords
This publication has 28 references indexed in Scilit:
- Preparation and characterization of nickel-coated graphite nanosheetsSynthetic Metals, 2010
- Influence of the spring stiffness on friction and wear behaviours of stainless steel/copper-impregnated metallized carbon couple with electrical currentWear, 2009
- Crack propagation, arrest and statistics in heterogeneous materialsJournal of Statistical Mechanics: Theory and Experiment, 2008
- Wettability of Graphite/Ni plus Cr SystemKey Engineering Materials, 2008
- Microstructure and magnetic properties of SiC/Co composite particles prepared by electroless platingSurface and Coatings Technology, 2006
- Effects of SiC particle size on CTEs of SiCp/Al composites by pulsed electric current sinteringMaterials Chemistry and Physics, 2006
- Friction and wear behavior of Ni–graphite composites prepared by electroformingMaterials & Design (1980-2015), 2006
- Friction and wear of copper–graphite composites made with Cu-coated and uncoated graphite powdersWear, 2002
- Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid compositesMaterials Science and Engineering: A, 2002
- Wettability of nickel coated graphite by aluminumMaterials Science and Engineering: A, 1998