Regularities of Brittle Fracture Zone Formation in the Zone of Dyke Around Horizontal Mine Workings
Open Access
Abstract
Mine development in complex geological conditions is associated with the risk of mine stability loss. Geological features such as dykes are characterized by higher strength and a tendency to undergo brittle fracture under the influence of the tectonic component of stress. In this study, numerical simulations were conducted to analyze the zone of influence of the dyke and the extent of brittle fracture zones on the hanging and footwall sides relative to the dyke. The results indicate that the dyke’s influence zone increases when the dyke is situated in a gentle slope, and the size of the brittle fracture zone depends on the hanging and footwall sides of the rocks, as well as the dip angle of the dyke to 30%. It was observed that the rate of change in the brittle fracture zone varies non-linearly with increasing stress level and then stabilizes once the stress reaches the ultimate strength of the material. Consequently, the design of mine workings requires adjustments in support methods and stability assurance techniques within the dyke’s influence zone.Keywords
This publication has 53 references indexed in Scilit:
- Study of restricted fractures in veins and dykes, and associated stress distributionJournal of Earth System Science, 2024
- Brittle Failure Modes and Mechanisms in Foliated Rock Under Uniaxial Compression: Laboratory Testing and Particle Flow ModelingGeotechnical and Geological Engineering, 2024
- Geomechanical Properties of Thinly Interbedded Rocks Based on Micro- and Macro-Scale MeasurementsRock Mechanics and Rock Engineering, 2023
- Hydraulic Fracture Vertical Propagation Mechanism in Interlayered Brittle Shale Formations: An Experimental InvestigationRock Mechanics and Rock Engineering, 2022
- Study of mechanical properties and failure characteristics of combined rock mass with weak interlayerGeomechanics and Geophysics for Geo-Energy and Geo-Resources, 2022
- A Review of the Influence of Microscopic Characteristics on the Progressively Brittle Failure of Foliated Rocks Subjected to Compression LoadingGeotechnical and Geological Engineering, 2021
- Stability Assessment of Cross-Tunnels in Jointed Rock Using Discrete Element Method2021
- Mohr‐Coulomb Yield Criterion in Rock Plastic MechanicsChinese Journal of Geophysics, 2012
- Microplane constitutive model for porous isotropic rocksInternational Journal for Numerical and Analytical Methods in Geomechanics, 2002
- In-situ stress measurements in Southern AfricaTectonophysics, 1975