Flexural Creep Behavior of High-Density Polyethylene Lumber and Wood Plastic Composite Lumber Made from Thermally Modified Wood
Open Access
Abstract
The use of wood plastic composite lumber as a structural member material in marine applications is challenging due to the tendency of wood plastic composites (WPCs) to creep and absorb water. A novel patent-pending WPC formulation that combines a thermally modified wood flour (as a cellulosic material) and a high strength styrenic copolymer (high impact polystyrene and styrene maleic anhydride) have been developed with advantageous viscoelastic properties (low initial creep compliance and creep rate) compared with the conventional WPCs. In this study, the creep behavior of the WPC and high-density polyethylene (HDPE) lumber in flexure was characterized and compared. Three sample groupings of WPC and HDPE lumber were subjected to three levels of creep stress; 7.5, 15, and 30% of the ultimate flexural strength (Fb) for a duration of 180 days. Because of the relatively low initial creep compliance of the WPC specimens (five times less) compared with the initial creep compliance of HDPE specimens, the creep deformation of HDPE specimens was six times higher than the creep deformation of WPC specimens at the 30% creep stress level. A Power Law model predicted that the strain (3%) to failure in the HDPE lumber would occur in 1.5 years at 30% Fb flexural stress while the predicted strain (1%) failure for the WPC lumber would occur in 150 years. The findings of this study suggest using the WPC lumber in structural application to replace the HDPE lumber in flexure attributable to the low time-dependent deformation when the applied stress value is withing the linear region of the stress-strain relationship.Keywords
This publication has 14 references indexed in Scilit:
- Structural Performance of HDPE and WPC Lumber Components Used in Aquacultural Geodesic Spherical CagesPolymers, 2019
- Experimental investigation of the hygrothermal creep strain of wood–plastic composite lumber made from thermally modified woodJournal of Thermoplastic Composite Materials, 2019
- Modeling the hygrothermal creep behavior of wood plastic composite (WPC) lumber made from thermally modified woodJournal of Thermoplastic Composite Materials, 2019
- Predicting the Flexure Response of Wood-Plastic Composites from Uni-Axial and Shear Data Using a Finite-Element ModelJournal of Materials in Civil Engineering, 2014
- Aquapod Systems for Sustainable Ocean Aquaculture2013
- Mechanical and time-dependent behavior of wood–plastic composites subjected to tension and compressionJournal of Thermoplastic Composite Materials, 2012
- Water absorption of wood polypropylene composite sheet piles and its influence on mechanical propertiesConstruction and Building Materials, 2011
- Time and temperature dependent response of a wood–polypropylene compositeComposites Part A: Applied Science and Manufacturing, 2011
- Wood‐Plastic Composites2007
- Three Dimensional Creep Model for Wood Under Variable Humidity-Numerical Analyses at Different Material ScalesMechanics of Time-Dependent Materials, 2005