Enhanced Li–S battery performance based on solution-impregnation-assisted sulfur/mesoporous carbon cathodes and a carbon-coated separator
Authors:
- 27 February 2017
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 5 (12) , 5750-5760
Abstract
The widespread use of lithium–sulfur (Li–S) batteries is still hindered by the low electrochemical activity of sulfur-species, and a short cycle life owing to anode instability coupled with polysulfide shuttle effects. As a first measure to counteract these issues, a new and simple sulfur-loading method consisting of solution impregnation and subsequent melt-diffusion (IM) is demonstrated and compared to the conventional method of physical mixing followed by melt-diffusion (PM). Using the IM method, sulfur is well encapsulated and highly dispersed in conducting mesoporous carbons (MCs) that possess an ideal pore diameter (around 10 nm) and a large pore volume (∼2.8 cm3 g−1). S/MC cathodes prepared by the IM method deliver much higher capacities, better rate responses and cycling stabilities up to 300 cycles (the fading rate was as low as −0.037% per cycle) with less concerns in lithium polysulfide (LPS) shuttling and impedance build up than S/MC cathodes prepared by the PM method. The S/MC cathodes prepared by the IM method has a pseudo-optimum sulfur content of 65 wt%, and when coupled with a new type of carbon-coated separator (CCS), a high areal capacity of >2.5 mA h cm−2 is successfully achieved, combined with excellent cycling stability and rate capability.Keywords
This publication has 55 references indexed in Scilit:
- Review on Li‐Sulfur Battery Systems: an Integral PerspectiveAdvanced Energy Materials, 2015
- Recent Advances in Electrolytes for Lithium–Sulfur BatteriesAdvanced Energy Materials, 2015
- Anodes for Rechargeable Lithium‐Sulfur BatteriesAdvanced Energy Materials, 2015
- Lithium–Sulfur Batteries: Progress and ProspectsAdvanced Materials, 2015
- Novel Hierarchically Porous Carbon Materials Obtained from Natural Biopolymer as Host Matrixes for Lithium–Sulfur Battery ApplicationsACS Applied Materials & Interfaces, 2014
- Nitrogen‐Doped Mesoporous Carbon Promoted Chemical Adsorption of Sulfur and Fabrication of High‐Areal‐Capacity Sulfur Cathode with Exceptional Cycling Stability for Lithium‐Sulfur BatteriesAdvanced Functional Materials, 2013
- Sulfur‐Infiltrated Micro‐ and Mesoporous Silicon Carbide‐Derived Carbon Cathode for High‐Performance Lithium Sulfur BatteriesAdvanced Materials, 2013
- High Sulfur Loading Cathodes Fabricated Using Peapodlike, Large Pore Volume Mesoporous Carbon for Lithium–Sulfur BatteryACS Applied Materials & Interfaces, 2013
- Nanostructured sulfur cathodesChemical Society Reviews, 2013
- Li–O2 and Li–S batteries with high energy storageNature Materials, 2011