Weld seam formation and mechanical properties of girth welds performed with laser-GMA-hybrid process on pipes of grade X65
- 1 January 2010
- conference paper
- Published by Laser Institute of America
- Vol. 2010 (1) , 62-69
Abstract
With the recent introduction of multi-kilowatt fiber lasers combining high beam quality with an impressive energy efficiency, it was possible to broaden the spectrum of laser beam and laser-hybrid welding applications widely. Application of these lasers for welding thick-walled structures in different branches of industry (e.g. power generation, shipbuilding, wind power, pipeline construction) is interesting, because the fiber lasers offer sufficient penetration depth to allow economically efficient welding of thick sheet metal, i.e. with a reduced number of welding passes and with a lower amount of filler material. A girth laser-hybrid process using a 20 kW fiber laser and a gas metal arc welding (GMAW) process was examined at BAM, Federal Institute for Materials Research and Testing, Berlin. The aim of this research was to obtain a stable and crack free girth process and to demonstrate the possibility of its application in pipeline construction. The experiments were carried out on 16 mm thick pipe rings...Keywords
This publication has 3 references indexed in Scilit:
- Laser-Hybrid Welding of Thick Plates up to 32 mm Using a 20 kW Fibre LaserQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2009
- CO2 & Nd:YAG laser orbital welding applied to offshore pipeline construction2001
- All‐position continuous electron beam welding of horizontally fixed heavy‐section pipes. Study of all‐position electron beam welding of large‐diameter pipeline joints (2nd Report)Welding International, 2001