Analysis of the Microstructure and Porosity of Cement Pastes with Functionalized Nanosilica with Different Contents of Aminosilane
Open Access
Abstract
This research aims to analyze the effect of functionalized nanosilica (NSF) with different levels of amine groups in the formation of hydration products. Four cement pastes were investigated, one reference with Portland cement and three replacing 1% of Portland cement by nanosilica (NS), NSF with a low content of amine groups, and NSF with a high content of amine groups. The heat of hydration of the pastes was evaluated up to 7 days of hydration, the amount of calcium hydroxide (CH) and hydrated phases by means of the thermogravimetric analysis (TGA) test and compressive strength at 2, 7, and 28 days, and porosity through tests of mercury intrusion porosimetry and computed tomography at 28 days of hydration. It was possible to observe that the NSF directly influenced the hydration kinetics of the pastes, delaying the hydration of the Portland cement; however, it demonstrated a similar mechanical performance to the paste with NS at 2 days of hydration and an increase of 10% at 28 days of hydration due to the improvement in the hydration process. Thus, it is possible to conclude that the functionalization of NSF with a low 3-aminopropyltriethoxysilane (APTES) content is promising for use in cementitious materials and may improve hydration and mechanical performance at more advanced ages compared to NS.Keywords
Funding Information
- National Council for Scientific and Technological Development (CNPq/Brazil)
- National Council for the Improvement of Higher Education (CAPES/Brazil)
- Federal District Research Support Foundation (FAPDF/Brazil)
- University of Brasilia (UnB/Brazil)
This publication has 41 references indexed in Scilit:
- Effect of silica-based nano and micro additions on SCC at early age and on hardened porosity and permeabilityConstruction and Building Materials, 2015
- The degree of hydration assessment of blended cement pastes by differential thermal and thermogravimetric analysis. Morphological evolution of the solid phasesThermochimica Acta, 2014
- Exploring the potential of siloxane surface modified nano-SiO2 to improve the Portland cement pastes hydration propertiesConstruction and Building Materials, 2014
- A comprehensive overview about the effect of nano-SiO2 on some properties of traditional cementitious materials and alkali-activated fly ashConstruction and Building Materials, 2014
- Synthesis and characterisation of silica nanoparticles bearing different functional groups obtained via a two‐stage methodphysica status solidi (c), 2010
- Mechanical and thermal properties of polyimide/silica hybrids with imide‐modified silica network structuresJournal of Applied Polymer Science, 2007
- Properties of high-volume fly ash concrete incorporating nano-SiO2Cement and Concrete Research, 2004
- Effect of complexation on the zeta potential of silica powderPowder Technology, 2003
- Concentration of hydroxyl groups on the surface of amorphous silicasLangmuir, 1987
- Influence of Water-Reducing Admixtures on Properties of Cement Paste—A Miniature Slump TestCement, Concrete and Aggregates, 1980