Moisture effects on moduli of pavement bases
- 28 November 2019
- journal article
- research article
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 22 (11) , 1410-1422
Abstract
Mechanistic-Empirical (ME) pavement design approaches consider seasonal moisture variations in the subgrade and unbound aggregates base (UAB) layers as an important design parameter. Understanding such moisture variation is essential for modelling the pavement section and predicting its performance. The Enhanced Integrated Climate Models (EICM) are often used to predict the moisture contents in the UAB and subgrade layers for different seasons so that the resilient moduli of the layers can be adjusted. This paper provides an in-depth analysis of the moisture effects on the moduli of a UAB material with four different gradations. Commonly used laboratory and field-testing methods were conducted to measure the moduli of the specimens prepared at different moisture contents and fine contents from the same UAB source. The UAB moduli decreased with the increase in the moisture content. However, the patterns in the reduction in modulus depended on the laboratory or field test method used. Although the EICM module of the AASHTOWare Pavement ME Design software can predict the laboratory resilient moduli at moisture contents greater than the optimum moisture content, it was not possible to measure the moduli at those elevated moisture contents for the selected UAB.Keywords
This publication has 17 references indexed in Scilit:
- Mechanistic-empirical models for better consideration of subgrade and unbound layers influence on pavement performanceTransportation Geotechnics, 2017
- In situ resilient modulus for geogrid-stabilized aggregate layer: A case study using automated plate load testingTransportation Geotechnics, 2017
- Comparison of Laboratory and Field Test Results for Granular Bases2017
- Estimation of Resilient Modulus of Unbound Aggregates Using Performance-Related Base Course PropertiesJournal of Materials in Civil Engineering, 2015
- Comparison of numerical and experimental responses of pavement systems using various resilient modulus modelsSoils and Foundations, 2014
- Enhanced Model for Resilient Response of Soils Resulting from Seasonal Changes as Implemented in Mechanistic–Empirical Pavement Design GuideTransportation Research Record: Journal of the Transportation Research Board, 2010
- Review of permeable pavement systemsBuilding and Environment, 2007
- Field Survey of Permeable Pavement Surface Infiltration RatesJournal of Irrigation and Drainage Engineering, 2007
- Influence of Water on Resilient Properties of Coarse Granular MaterialsRoad Materials and Pavement Design, 2006
- State of the Art. I: Resilient Response of Unbound AggregatesJournal of Transportation Engineering, 2000