Influence of Filler/Binder Ratio on the Fatigue Behavior of Epoxy Asphalt Concrete
Open Access
- 1 February 2024
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2706 (1) , 012050
Abstract
To further explore the influence of the filler/binder (F/B) ratio on the fatigue behavior of epoxy asphalt concrete (EAC), in this study, three typical F/B ratios are designed according to the EAC pavement of steel bridges in China, including 1.49, 1.95 and 2.48. The four-point fatigue behavior of the EAC with various F/B ratios was tested and analyzed. The results show that a higher F/B ratio leads a more rapid increase in the ratio of dissipated energy change (RDEC) during limited loading repetitions, as well as an increased likelihood of irreversible damage and a shorter fatigue life for the EAC. To ensure adequate fatigue performance of the EAC, it is recommended that the F/B ratio be controlled below 1.95.Keywords
This publication has 11 references indexed in Scilit:
- Performance characteristics of epoxy asphalt paving material for thin orthotropic steel plate decksInternational Journal of Pavement Engineering, 2018
- Application of steel slag powder to enhance the low-temperature fracture properties of asphalt mastic and its corresponding mechanismJournal of Cleaner Production, 2018
- Fatigue behavior of epoxy asphalt concrete and its moisture susceptibility from flexural stiffness and phase angleConstruction and Building Materials, 2017
- Design principle of deck pavements for long-span steel bridges with heavy-duty traffic in ChinaRoad Materials and Pavement Design, 2017
- Investigation of rutting, fracture and thermal cracking behavior of asphalt mastic containing basalt and hydrated lime fillersConstruction and Building Materials, 2017
- A pothole patching material for epoxy asphalt pavement on steel bridges: Fatigue test and numerical analysisConstruction and Building Materials, 2015
- Comparison between the fatigue response of hot and warm mix asphalts based on the dissipated energy approachInternational Journal of Pavement Engineering, 2015
- Alternate uses of epoxy asphalt on bridge decks and roadwaysConstruction and Building Materials, 2015
- Research on High- and Low-Temperature Properties of Asphalt-Mineral Filler MasticJournal of Materials in Civil Engineering, 2010
- Is Low-Temperature Creep of Asphalt Mastic Independent of Filler Shape and Mineralogy?—Arguments from Multiscale AnalysisJournal of Materials in Civil Engineering, 2005