Island growth in the atomic layer deposition of zirconium oxide and aluminum oxide on hydrogen-terminated silicon: Growth mode modeling and transmission electron microscopy
- 1 November 2004
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 96 (9) , 4878-4889
Abstract
Atomic layer deposition (ALD) is used in applications where inorganic material layers with uniform thickness down to the nanometer range are required. For such thicknesses, the growth mode, defining how the material is arranged on the surface during the growth, is of critical importance. In this work, the growth mode of the zirconium tetrachloride∕water and the trimethyl aluminum∕water ALD process on hydrogen-terminated silicon was investigated by combining information on the total amount of material deposited with information on the surface fraction of the material. The total amount of material deposited was measured by Rutherford backscattering, x-ray fluorescence, and inductively coupled plasma–optical emission spectroscopy, and the surface fractions by low-energy ion scattering. Growth mode modeling was made assuming two-dimensional growth or random deposition (RD), with a “shower model” of RD recently developed for ALD. Experimental surface fractions of the ALD-grown zirconium oxide and aluminum oxide films were lower than the surface fractions calculated assuming RD, suggesting the occurrence of island growth. Island growth was confirmed with transmission electron microscopy (TEM) measurements, from which the island size and number of islands per unit surface area could also be estimated. The conclusion of island growth for the aluminum oxide deposition on hydrogen-terminated silicon contradicts earlier observations. In this work, physical aluminum oxide islands were observed in TEM after 15 ALD reaction cycles. Earlier, thicker aluminum oxide layers have been analyzed, where islands have not been observed because they have already coalesced to form a continuous film. The unreactivity of hydrogen-terminated silicon surface towards the ALD reactants, except for reactive defect areas, is proposed as the origin of island growth. Consequently, island growth can be regarded as “undesired surface-selective ALD.”Keywords
This publication has 102 references indexed in Scilit:
- Chemical methods of thin film deposition: Chemical vapor deposition, atomic layer deposition, and related technologiesJournal of Vacuum Science & Technology A, 2003
- Ultrathin HfO2 films grown on silicon by atomic layer deposition for advanced gate dielectrics applicationsMicroelectronic Engineering, 2003
- Nucleation and interface formation mechanisms in atomic layer deposition of gate oxidesApplied Physics Letters, 2003
- Growth mechanism and continuity of atomic layer deposited TiN films on thermal SiO2Journal of Applied Physics, 2002
- Characterisation of ALCVD Al2O3–ZrO2 nanolaminates, link between electrical and structural propertiesJournal of Non-Crystalline Solids, 2002
- Characterization of ALCVD-Al2O3 and ZrO2 layer using X-ray photoelectron spectroscopyJournal of Non-Crystalline Solids, 2002
- Growth of Aluminum Nitride on Porous Alumina and Silica through Separate Saturated Gas−Solid Reactions of Trimethylaluminum and AmmoniaChemistry of Materials, 2002
- Successive reactions of gaseous trimethylaluminium and ammonia on porous aluminaPhysical Chemistry Chemical Physics, 2001
- Random-deposition models for thin-film epitaxial growthPhysical Review B, 1989
- Characterization of silica overlayers deposited on ZrO 2 and TiO 2 by CVD of Si(OC 2 H 5 ) 4Surface and Interface Analysis, 1988