Microstructure and mechanical properties of ferritic-martensitic steel EP-823 after high-temperature thermomechanical treatment
Authors:
- K. V. AlmaevaKAK. V. Almaeva
- I. Yu. LitovchenkoI. Yu. Litovchenko
- 19 November 2019
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2167 (1) , 020013
Abstract
The effect of high-temperature thermomechanical treatment (HTMT) with deformation in the austenitic region on the microstructure and mechanical properties of 12% chromium ferritic-martensitic steel EP-823 is investigated. It is shown that the strength properties of steel after HTMT exceed the corresponding values after traditional heat treatment (THT) at the temperatures of 20 and 650 °C. The features of steel microstructure are studied by optical metallography and transmission electron microscopy. It is shown that under the HTMT conditions the original austenite grains are elongated in the rolling direction, while their dimensions perpendicular to the rolling direction decrease and are found to be ≈ 10 µm on average. HTMT provides the formation of a heterophase microstructure with high dispersion of such nanosized precipitates as MX and high dislocation density. These microstructure features of steel EP-823 after HTMT ensure higher strength properties than those after the THT. At an elevated deformation temperature (650 °C) the hardening effects are reduced.Keywords
This publication has 7 references indexed in Scilit:
- A comparative investigation of mechanical properties of the ferritic-martensitic steel EK-181 in the temperature range 700–800°C after high-temperature thermomechanical and traditional heat treatmentsAIP Conference Proceedings, 2018
- Temperature Dependences of Mechanical Properties and Fracture Features of Low-Activation Ferritic-Martensitic EK-181 Steel in a Temperature Range from – 196 to 720°CPhysics of Atomic Nuclei, 2018
- Effect of high-temperature thermomechanical treatment in the austenite region on microstructure and mechanical properties of low-activated 12% chromium ferritic-martensitic steel EK-181Technical Physics, 2017
- Improvement of reduced activation 9%Cr steels by ausformingNuclear Materials and Energy, 2016
- Characterization of a boron alloyed 9Cr3W3CoVNbBN steel and further improvement of its high-temperature mechanical properties by thermomechanical treatmentsJournal of Nuclear Materials, 2013
- High-temperature mechanical properties improvement on modified 9Cr–1Mo martensitic steel through thermomechanical treatmentsJournal of Nuclear Materials, 2010
- New nano-particle-strengthened ferritic/martensitic steels by conventional thermo-mechanical treatmentJournal of Nuclear Materials, 2007