Potassium citrate-derived porous carbon with high CO2 capture and Congo red adsorption performance
Authors:
Open Access
- 8 February 2023
- journal article
- research article
- Published by Springer Nature in Environmental Sciences Europe
- Vol. 35 (1) , 1-13
Abstract
The objective is to achieve the goal of carbon neutrality, controlling CO2 emissions is a primary problem to be solved in the current environmental protection field. Eliminating the environmental pollution of dyes in industrial wastewater is also an urgent problem to be solved in the field of environmental protection. The adsorption technique is an effective way to deal with these two issues. Developing high-efficiency adsorbents is an essential work in the adsorption field. In this work, a simple carbonization method has been developed to prepare porous carbon. The morphology and structure of the prepared porous carbon were investigated by scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and surface area measurement. By studying the influence of preparation conditions on the structure and properties of the prepared carbon materials, it was found that the carbon materials prepared at 900 ℃ (PCMCA-900) exhibited a high specific surface area of 1476 m2 g−1 and a high total pore volume of 0.951 cm3 g−1. The PCMCA-900 showed the highest CO2 uptake of 7.67 mmol g−1 at 0 ºC and the adsorption capacity of PCMCA-900 decreased by less than 5% after 10 times recycling. Moreover, when PCMCA-900 was used as an adsorbent to remove Congo red in water, an adsorption capacity of 652.3 mg g−1 was achieved. Therefore, potassium citrate-derived porous carbon is a desirable candidate for excellent CO2 adsorption and Congo red in industrial wastewater.Keywords
All Related Versions
This publication has 69 references indexed in Scilit:
- Pectin extraction from pomegranate peels with citric acidInternational Journal of Biological Macromolecules, 2016
- Functionalization of cubic mesoporous silica SBA-16 with carboxylic acid via one-pot synthesis route for effective removal of cationic dyesJournal of Hazardous Materials, 2016
- An overview of activated carbons utilization for the post-combustion carbon dioxide captureJournal of CO2 Utilization, 2016
- Extraction of dye from aqueous solution in rotating packed bedJournal of Hazardous Materials, 2016
- Kinetic modeling of liquid-phase adsorption of Congo red dye using guava leaf-based activated carbonApplied Water Science, 2016
- Biomass-derived activated carbon with simultaneously enhanced CO 2 uptake for both pre and post combustion capture applicationsJournal of Materials Chemistry A, 2015
- Resorcinol–formaldehyde based nanostructured carbons for CO2 adsorption: kinetics, isotherm and thermodynamic studiesRSC Advances, 2015
- Synthesis of nitrogen doped mesoporous carbons for carbon dioxide captureRSC Advances, 2015
- Direct Synthesis of Highly Porous Interconnected Carbon Nanosheets and Their Application as High-Performance SupercapacitorsACS Nano, 2014
- Highly Selective and Stable Carbon Dioxide Uptake in Polyindole-Derived Microporous Carbon MaterialsEnvironmental Science & Technology, 2013