Preparation of Zirconia Coatings by Hydrolysis of Zirconium Alkoxide with Hydrogen Peroxide
Authors:
- 1 April 1993
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 76 (4) , 1061-1064
Abstract
Coatings of 8.8‐mol%‐yttria‐doped zirconia were fabricated using a transparent and spinnable sol prepared by hydrolysis of zirconium alkoxide with hydrogen peroxide and nitric acid. The sol gave a crack‐free coating film consisting of fine grains. The crystalline phase was cubic after heating at 1000° and 1200°C and cubic and tetragonal at 1350°C, with the coating being highly oriented in the (111) plane, especially at 1000°C. Activation energy of the coating films was higher than that of the bulk. Transmittance through a film thickness of about 0.3 μm on each side was 75%.Keywords
This publication has 10 references indexed in Scilit:
- Ceramic Coatings in Internal Combustion Engines1992
- Development of Planar SOFC Technology : Progress and ProblemsDenki Kagaku oyobi Kogyo Butsuri Kagaku, 1990
- Morphology of electrochemical vapor deposited yttria-stabilized zirconia thin filmsSolid State Ionics, 1990
- Preparation and characterization of zirconium oxide coatings prepared from ZrCl2(OC2H5)2 by the sol-gel processJournal of Non-Crystalline Solids, 1989
- Alkoxide-derived amorphous ZrO2 coatingsThin Solid Films, 1988
- Rheology of sols and fiber drawingJournal of Non-Crystalline Solids, 1988
- A low temperature synthesis of zirconium oxide coating using chelating agentsJournal of Non-Crystalline Solids, 1988
- HR Coatings Prepared from Colloidal Suspensions1988
- Preparation of amorphous ZrO2 coatings from metal-organic solutionsJournal of Materials Science Letters, 1984
- Electrical Resistivity of Stabilized Zirconia at Elevated TemperaturesJournal of the Electrochemical Society, 1963