In Situ Ultrasonic Characterization of Hydrogen Damage Evolution in X80 Pipeline Steel
Top Cited Papers
Open Access
Abstract
A nondestructive evaluation of the hydrogen damage of materials in a hydrogen environment is important for monitoring the running conditions of various pieces of equipment. In this work, a new thermostatic electrolytic hydrogenation in situ ultrasonic test system (In Situ TEH-UT) was developed. The system operates by combining cross-correlation delay estimation and frequency domain amplitude estimation and hence improves measurement accuracy with respect to ultrasonic propagation time and amplitude, allowing in situ ultrasonic evaluation of the hydrogen-charging process in X80 pipeline steel. The experimental results show that under a 30 mA/cm2 hydrogen-charging current, the hydrogen saturation time of X80 pipeline steel is 800 min. Between 0 and 800 min, the attenuation coefficient and amplitude attenuation both demonstrate a strong linear relationship with the hydrogen-charging time. After 800 min, the attenuation coefficient and amplitude attenuation do not change further, while the attenuation coefficient fluctuates greatly. Through the characterization of the microstructures of the materials analyzed, it was found that hydrogen-induced cracks (HICs) constituted the main reason for the change in the ultrasonic parameters, and the mechanism behind the hydrogen-induced damage layer (HIDL) was determined. This study provides reference significance for clarifying the change mechanism of ultrasonic parameters under hydrogen damage conditions and determining the extent of hydrogen damage using an ultrasonic technique.Keywords
Funding Information
- Key Research and Development Plan of Sichuan Province (25GJHZ0239, 25NSFSC2311, 2023MK054)
- Natural Science Foundation of Sichuan Province (25GJHZ0239, 25NSFSC2311, 2023MK054)
- Market Supervision Administration Research Project (25GJHZ0239, 25NSFSC2311, 2023MK054)
This publication has 19 references indexed in Scilit:
- On the suitability of slow strain rate tensile testing for assessing hydrogen embrittlement susceptibilityCorrosion Science, 2020
- Effects of internal hydrogen and surface-absorbed hydrogen on the hydrogen embrittlement of X80 pipeline steelInternational Journal of Hydrogen Energy, 2019
- Estimation of crack initiation stress and local fracture toughness of Ni-alloys 945X (UNS N09946) and 718 (UNS N07718) under hydrogen environment via fracture surface topography analysisEngineering Fracture Mechanics, 2018
- Hydrogen damage of steels: A case study and hydrogen embrittlement modelEngineering Failure Analysis, 2015
- On the correlation between microstructural evolution and ultrasonic properties: a reviewJournal of Materials Science, 2015
- Experimental study of hydrogen embrittlement on AISI 304 stainless steels and Rayleigh wave characterizationEngineering Failure Analysis, 2013
- Hydrogen embrittlement assessment of ultra-high strength steel 30CrMnSiNi2Corrosion Science, 2013
- Estimating ultrasonic time of flight using envelope and quasi maximum likelihood method for damage detection and assessmentMeasurement, 2012
- Hydrogen induced cracking of X80 pipeline steelInternational Journal of Minerals, Metallurgy and Materials, 2010
- Study on hydrogen absorption of pipeline steel under cathodic chargingCorrosion Science, 2006