Laser Surface Treatment of Nickel‐Alumina Coating for Enhancement of Erosion and Corrosion Resistance of High Speed Steel Vanes
Open Access
- 23 September 2026
- journal article
- research article
- Published by Wiley in Applied Research
- Vol. 5 (5) , e70200
Abstract
The sliding wear between hydraulic vane tip and the inner surface of the cam ring can cause fatigue cracks and affect the durability of the vane surfaces. This paper examines the effect of laser surface treatment on plasma sprayed nickel −10% alumina coating on erosion and corrosion resistance of high speed steel (HSS) vanes. The hydraulic vanes were subjected to surface treatment using 20 W nanosecond laser at varying laser power of 6 W, 13 W, and 18 W. Erosion test was performed using custom built slurry erosion test rig running with ISO‐32 grade hydraulic oil mixed with 5% quartz. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were performed to evaluate the corrosion behaviour. The results showed that laser surface treatment had improved the surface texture and micro hardness of the coated vanes. The highest corrosion inhibition efficiency of 81.3% was observed for the coated vane treated at the highest laser power. This trend was consistent in the EIS investigation, with inhibition efficiency reaching 78.5% for the coated vane treated at the highest laser power and 65% for the untreated coated vane. Scanning electron microscope depicted uniform dense coating with some pores, splats and unmixed powders.Keywords
This publication has 43 references indexed in Scilit:
- A Detailed Review of Numerical Modeling of Flow Accelerated Corrosion: Challenges and Opportunities for the FutureMaterials and Corrosion, 2024
- Impact of femtosecond laser surface structuring on NiCoCr and NiCoV medium entropy alloy systems for an overall electrochemical water splittingInternational Journal of Hydrogen Energy, 2024
- Room Temperature Columnar Liquid Crystalline Perylene Bisimide as a Novel Corrosion Resistant Surface Film for Mild Steel SurfaceJournal of Bio- and Tribo-Corrosion, 2022
- Oxygen evolution reaction enhancement of copper electrodes in alkaline medium using ultrafast femtosecond laser structuringInternational Journal of Hydrogen Energy, 2022
- Enhancement of the corrosion resistance of mild steel with femtosecond laser- nanostructuring and CrCoNi medium entropy alloy coatingApplied Surface Science Advances, 2022
- Dynamic and localized microelectrochemical approaches to evaluate the corrosion resistance of newly developed lean duplex stainless steel alloysMaterials and Corrosion, 2022
- Wear performance analysis and characterization of HVOF deposited Ni–20Cr2O3, Ni–30Al2O3, and Al2O3–13TiO2 coatingsApplied Surface Science Advances, 2021
- Slurry Erosion Performance of High-Velocity Flame-Sprayed Ni-20Al2O3 and Ni-10Al2O3-10TiO2 Coatings Under Accelerated ConditionsJournal of Thermal Spray Technology, 2017
- Slurry Erosion Performance of Ni-Al2O3 Based Thermal-Sprayed Coatings: Effect of Angle of ImpingementJournal of Thermal Spray Technology, 2013
- Effects of Laser Re-melting on the Corrosion Properties of HVOF CoatingsJournal of Materials Engineering and Performance, 2012