Response of Restrained Concrete Beams under Design Fire Exposure
Authors:
- 1 November 2009
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 135 (11) , 1408-1417
Abstract
Results from fire resistance experiments on six RC beams are presented in this paper. The test variables included concrete strength (permeability), support conditions, fire scenario, and load ratio. Data from fire tests are used to illustrate the comparative performance of high strength concrete (HSC) and normal strength concrete (NSC) beams under fire conditions. Also, data from the tests is used to validate a macroscopic finite-element model specifically developed for tracing the fire response of RC beams. Results from the tests and numerical studies show that HSC beams have lower fire resistance than that of NSC beams. It is also shown that HSC beams exhibit higher levels of spalling which is largely influenced by the permeability of concrete, type of fire exposure, load level, and restraint conditions. Similarly, the type of fire scenario, axial restraint, and load level have significant influence on the overall fire resistance of RC beams. These factors are to be considered for evaluating the fire re...Keywords
This publication has 14 references indexed in Scilit:
- Hydrothermal model for predicting fire-induced spalling in concrete structural systemsFire Safety Journal, 2009
- A numerical approach for modeling the fire induced restraint effects in reinforced concrete beamsFire Safety Journal, 2008
- Outcomes of a major research on fire resistance of concrete columnsFire Safety Journal, 2004
- Limits of spalling of fire-exposed concreteFire Safety Journal, 2003
- Fire Tests and Calculation Methods for Circular Concrete ColumnsFire Technology, 2003
- Spalling in High Strength Concrete Exposed to Fire: Concerns, Causes, Critical Parameters and Cures2000
- Numerical analysis of hygro‐thermal behaviour and damage of concrete at high temperatureMechanics of Cohesive-frictional Materials, 1999
- Flexure and Shear Behavior of Concrete Beams during FiresJournal of Structural Engineering, 1991
- The use of numerical models for the fire analysis of reinforced concrete and composite structuresEngineering Analysis, 1985
- A Comprehensive Creep ModelJournal of Basic Engineering, 1967