EXPRESSION OF CONCERN: Tribological behavior of graphite oxide reinforced polyethersulfone composite under drying sliding condition
Authors:
- 20 September 2016
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 39 (7) , 2320-2335
Abstract
Nano‐sized graphite oxide (GO) sheets prepared from expanded graphite (EG) particles were incorporated into polyethersulfone (PES) to improve the friction and wear properties of this polymer. The influence of GO addition on the mechanical, thermal, and tribological performances of PES composites was evaluated. The results of Fourier transform infrared spectroscopy and scanning electron microscopy for GO/PES composites reveal that the hydrogen bonding interaction between GO sheets and PES matrix is formed. The mechanical and thermal properties of PES composites are obviously enhanced due to the incorporation of GO sheets. The friction reducing and anti‐wear properties of GO/PES composites are much better than those of the pure PES. Among these fabricated GO/PES composites, the PES composite reinforced with GO addition of 0.6 wt% exhibits the lowest friction coefficient (0.17) and specific wear rate (1.07 × 10−14 m3/Nm). This can be attributed to the homogeneous dispersion of GO sheets within PES matrix and the strong interfacial interaction between them, as well as the existence of uniform PES transfer film on the frictional interface. POLYM. COMPOS., 39:2320–2335, 2018. © 2016 Society of Plastics EngineersKeywords
This publication has 34 references indexed in Scilit:
- Fabrication and characterization of anti-fouling and anti-bacterial Ag-loaded graphene oxide/polyethersulfone mixed matrix membraneJournal of Industrial and Engineering Chemistry, 2015
- Influence of plasma pre-treatment of polytetrafluoroethylene (PTFE) micropowders on the mechanical and tribological performance of Polyethersulfone (PESU)–PTFE compositesWear, 2015
- Surface modification of carbon fibers by a polyether sulfone emulsion sizing for increased interfacial adhesion with polyether sulfoneApplied Surface Science, 2014
- Scale-up and purification of graphite oxide as intermediate for functionalized grapheneCarbon, 2014
- Influence of different carbon nanotubes on the electrical and mechanical properties of melt mixed poly(ether sulfone)-multi walled carbon nanotube compositesComposites Science and Technology, 2012
- Surface designing of carbon fabric polymer composites with nano and micron sized PTFE particlesJournal of Materials Science, 2012
- Influence of molecular weight on performance properties of polyethersulphone and its composites with carbon fabricWear, 2012
- Studies for Wear Property Correlation for Carbon Fabric-Reinforced PES CompositesTribology Letters, 2011
- Abrasive wear studies on composites of PEEK and PES with modified surface of carbon fabricTribology International, 2011
- Influence of orientation and volume fraction of Aramid fabric on abrasive wear performance of polyethersulfone compositesWear, 2006