Mechanism of Fatigue Failure Anisotropy of Extruded Al‐Cu‐Li Alloy
Authors:
- 19 September 2025
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 48 (12) , 5145-5160
Abstract
This study systematically investigates the anisotropic failure behavior of extruded Al‐Cu‐Li alloys under very high cycle fatigue (VHCF) conditions. Ultrasonic fatigue testing reveals that, after aging, specimens loaded along the extrusion direction (ED) exhibit significantly longer fatigue lifetimes than those along the transverse direction (TD) and normal direction (ND), with all orientations achieving VHCF performance. A detailed analysis of < 100 > and < 111 > fiber textures demonstrates their pronounced influence on fatigue crack initiation sites, propagation paths, and fracture modes. Finite element analysis and microstructural characterization are combined to establish a mechanism chain linking texture evolution, slip behavior, stress localization, and fatigue crack growth. The results show that the < 111 > texture promotes orientation‐dependent slip constraint and stress accumulation at grain boundaries and unfavorably oriented slip systems, thereby governing the formation of anisotropic fatigue failure modes. These findings provide key mechanistic insight into the fatigue failure behavior of Al‐Cu‐Li alloys and lay a theoretical foundation for their reliable structural application.Keywords
Funding Information
- National Natural Science Foundation of China (52205369)
This publication has 47 references indexed in Scilit:
- The influence of stress levels on crack initiation and propagation behaviors of an Al-Li alloy under high cycle fatigueInternational Journal of Fatigue, 2025
- Enhanced fatigue crack propagation resistance of Al-Cu-Li alloys via regulating grain structure and precipitation behaviorInternational Journal of Fatigue, 2025
- Significant reduction of anisotropy in stress relaxation aging and mechanical properties improvement for 2195 Al-Cu-Li alloy subjected to plastic loadingChinese Journal of Aeronautics, 2024
- Anisotropic behavior of as-extruded 7003 aluminum alloy under quasi-static compression and high-speed impactInternational Journal of Impact Engineering, 2023
- Fatigue crack propagation of AA2024 alloy under texture control using crystal plasticity coupled with accelerated cyclic cohesive zone modelEngineering Fracture Mechanics, 2023
- Small fatigue crack growth in an extruded dual-phase Mg-Li alloyInternational Journal of Fatigue, 2023
- Improving the high-cycle fatigue strength of heterogeneous carbon nanotube/Al-Cu-Mg composites through grain size design in ductile-zonesComposites Part B: Engineering, 2021
- The effect of precipitate-induced backstresses on plastic anisotropy: Demonstrated by modeling the behavior of aluminum alloy, 7085International Journal of Plasticity, 2019
- J-integral expression for mixed mode I/II ductile failure prediction of U-notched Al 6061-T6 plates under large-scale yielding regimeEngineering Fracture Mechanics, 2018
- Mechanism for fatigue striations as formed under variable negative R-ratio in Al-based structural alloysInternational Journal of Fatigue, 2013