Mechanical Metamaterials in Mitigating Vibrations in Battery Pack Casings
Open Access
Abstract
Battery pack casings with a total energy of 12.432 kWh were designed using two types of materials: aluminum alloy and carbon fiber reinforced composite filament based on polyphthalamide or high-performance/high-temperature nylon (PPA-CF). The effectiveness of mechanical metamaterials (lattice and auxetic structures) in mitigating the levels of random vibrations in the battery pack casings was studied using a numerical method. Both structures demonstrate outstanding capabilities with a 97% to 99% reduction in vibration levels in the aluminum casing. However, the capabilities of these structures in mitigating vibration levels in the PPA-CF casing are very limited, in that they can only mitigate approximately 63.8% and 92.8% of the longitudinal vibrations at the top cover of the casing and center of its front and back walls, respectively. Compared to PPA-CF, aluminum alloy shows better vibration mitigation performance with or without structural modification.Keywords
Funding Information
- Agency for Science, Technology and Research (RIE2020/RIE2025 〈A*STAR IAFPP〉, M23L6a0020)
This publication has 16 references indexed in Scilit:
- Vibration characteristics of additive manufactured IWP-type TPMS lattice structuresComposite Structures, 2023
- Development of an innovative quasi-zero stiffness oscillation model using pneumatic artificial muscleCommunications in Nonlinear Science and Numerical Simulation, 2023
- Road safety: The influence of vibration frequency on driver drowsiness, reaction time, and driving performanceApplied Ergonomics, 2023
- Damping property of a NiTi auxetic structure fabricated through selective laser meltingThe International Journal of Advanced Manufacturing Technology, 2023
- Spindle vibration mitigation utilizing additively manufactured auxetic materialsJournal of Manufacturing Processes, 2022
- A review on application of mechanical metamaterials for vibration controlMechanics of Advanced Materials and Structures, 2021
- A device capable of customizing nonlinear forces for vibration energy harvesting, vibration isolation, and nonlinear energy sinkMechanical Systems and Signal Processing, 2021
- Intelligent design optimization of battery pack enclosure for electric vehicle by considering cold‐spraying as an additive manufacturing technologyEnergy Storage, 2020
- Design and analysis of strut-based lattice structures for vibration isolationPrecision Engineering, 2018
- Vibration transmissibility and damping behaviour for auxetic and conventional foams under linear and nonlinear regimesSmart Materials and Structures, 2013