Polystyrene Magnetic Nanocomposites as Antibiotic Adsorbents
Open Access
Abstract
There are different ways for antibiotics to enter the aquatic environment, with wastewater treatment plants (WWTP) considered to be one of the main points of entrance. Even treated wastewater effluent can contain antibiotics, since WWTP cannot eliminate the presence of antibiotics. Therefore, adsorption can be a sustainable option, compared to other tertiary treatments. In this direction, a versatile synthesis of poly(styrene-block-acrylic acid) diblock copolymer/Fe3O4 magnetic nanocomposite (abbreviated as P(St-b-AAc)/Fe3O4)) was achieved for environmental applications, and particularly for the removal of antibiotic compounds. For this reason, the synthesis of the P(St-b-AAc) diblock copolymer was conducted with a reversible addition fragmentation transfer (RAFT) method. Monodisperse superparamagnetic nanocomposite with carboxylic acid groups of acrylic acid was adsorbed on the surface of Fe3O4 nanoparticles. The nanocomposites were characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) analysis. Then, the nanoparticles were applied to remove ciprofloxacin (antibiotic drug compound) from aqueous solutions. The effects of various parameters, such as initial drug concentration, solution pH, adsorbent dosage, and contact time on the process were extensively studied. Operational parameters and their efficacy in the removal of Ciprofloxacin were studied. Kinetic and adsorption isothermal studies were also carried out. The maximum removal efficiency of ciprofloxacin (97.5%) was found at an initial concentration of 5 mg/L, pH 7, adsorbent’s dosage 2 mg/L, contact time equal to 37.5 min. The initial concentration of antibiotic and the dose of the adsorbent presented the highest impact on efficiency. The adsorption of ciprofloxacin was better fitted to Langmuir isotherm (R2 = 0.9995), while the kinetics were better fitted to second-order kinetic equation (R2 = 0.9973).Keywords
This publication has 70 references indexed in Scilit:
- Preparation of magnetic poly(vinylimidazole‐co‐divinylbenzene) nanoparticles and their application in the trace analysis of fluoroquinolones in environmental water samplesJournal of Separation Science, 2013
- Removal of ciprofloxacin from water by birnessiteJournal of Hazardous Materials, 2013
- Degradation, mineralization and antibiotic inactivation of amoxicillin by UV-A/TiO2 photocatalysisJournal of Environmental Management, 2012
- Cation exchange interaction between antibiotic ciprofloxacin and montmorilloniteJournal of Hazardous Materials, 2010
- Effect of cytostatic drug presence on extracellular polymeric substances formation in municipal wastewater treated by membrane bioreactorBioresource Technology, 2010
- Arsenic removal from water/wastewater using adsorbents—A critical reviewJournal of Hazardous Materials, 2007
- Analysis of pharmaceuticals in wastewater and removal using a membrane bioreactorAnalytical and Bioanalytical Chemistry, 2006
- Solubility of Antibiotics in Different Solvents. 1. Hydrochloride Forms of Tetracycline, Moxifloxacin, and CiprofloxacinIndustrial & Engineering Chemistry Research, 2006
- Sorption of acetaminophen, 17α-ethynyl estradiol, nalidixic acid, and norfloxacin to silica, alumina, and a hydrophobic mediumWater Research, 2006
- Pseudo-second order model for sorption processesProcess Biochemistry, 1999