Experimental investigation of nanofluids in minimum quantity lubrication during turning of EN-24 steel
Authors:
- 14 October 2019
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 234 (5) , 712-729
Abstract
The present work evaluates the performance of different machining environments such as dry, wet, minimum quantity lubrication, Al2O3 nanofluids based minimum quantity lubrication, CuO nanofluids based minimum quantity lubrication and Al–CuO hybrid nanofluids based minimum quantity lubrication on machining performance characteristics during turning of EN-24. The nanofluids and hybrid nanofluids were prepared by adding the Al2O3, CuO and Al2O3/CuO to the soluble oil with different weight percentages (0.5 wt.%, 1 wt.%, 1.5 wt.%). The thermal and tribological properties of hybrid nanofluid and nanofluids were analyzed. The comparative analysis of different turning environments has been done. From comparative analysis it is clearly observed that the nanofluids and hybrid nanofluid shows better performance during turning of EN-24 steel. So there is a need for optimization of parameters during turning of EN-24 under Al2O3 nanofluids based minimum quantity lubrication, CuO nanofluids based minimum quantity lubrication and Al–CuO hybrid nanofluids based minimum quantity lubrication. The optimization of parameters has been done by response surface methodology. The significance of developed model was identified from analysis of variance. Multi-response optimization was done using desirability function approach. To verify the accuracy of developed models, confirmatory experiments were performed. The experimental results reveal that Al–CuO hybrid nanofluids based minimum quantity lubrication significantly improves surface quality, reduces cutting temperature and cutting forces.Keywords
This publication has 24 references indexed in Scilit:
- Experimental investigation of the effect of processing parameters on the surface roughness operation for using as expert system databaseJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
- Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operationTribology International, 2018
- Experimental investigation of copper nanofluid based minimum quantity lubrication in turning of H 11 steelJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
- Performances of Al2O3/SiC hybrid nanofluids in minimum-quantity lubrication grindingThe International Journal of Advanced Manufacturing Technology, 2016
- Minimum quantity lubrication-MQL turning of AISI 4140 steel alloyJournal of Cleaner Production, 2013
- Nano-Cutting Fluid for Enhancement of Metal Cutting PerformanceMaterials and Manufacturing Processes, 2012
- Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3Journal of Cleaner Production, 2011
- Effect of minimum quantity lubrication with Al2O3 nanoparticles on surface roughness, tool wear and temperature dissipation in machining Inconel 600 alloyProceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 2011
- An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steelInternational Journal of Machine Tools and Manufacture, 2007
- Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steelJournal of Materials Processing Technology, 2006