Studies on the application of platform atomization to furnace atomic non-thermal excitation spectrometry for the simultaneous multi-element analysis of environmental materials
Authors:
- Douglas C. BaxterDBDouglas C. Baxter
- Robbin NicholRNRobbin Nichol
- David LittlejohnDLDavid Littlejohn
- Christian LüdkeCLChristian Lüdke
- Jochen SkoleJSJochen Skole
- Erwin HoffmannEHErwin Hoffmann
- 1 January 1992
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 7 (5) , 727-734
Abstract
Response surface methodology was used to optimize the discharge current and pressure with respect to detection limits for the simultaneous multi-element determination of Al, Cd, Cr, Cu, Fe, Ni and Pb by furnace atomic non-thermal excitation spectrometry (FANES). Comparison of wall and platform atomization showed improved detection limits for most elements with the latter. Despite the use of automatic background correction by wavelength modulation, residual background signals were observed at all lines, those on the Cd, Cu, Fe and Pb channels being rectified by including an ‘autozero’ procedure in the data processing software. For the remaining elements, spectral interferences disrupted the baseline during the atomization step, although blank subtraction provided satisfactory correction. Nevertheless, the presence of structured background emission poses a potentially serious source of error in FANES measurements. In the multi-element analysis of microwave-assisted digests of three environmental reference materials [National Institute of Standards and Technology (NIST) Standard Reference Material (SRM) 1572 Citrus Leaves, SRM 1575 Pine Needles and SRM 1645 River Sediment] by platform-equipped FANES, non-spectral interferences arose for all analytes except Cd and Pb. The use of the standard additions method was thus necessary for calibration purposes.Keywords
This publication has 27 references indexed in Scilit:
- Atomic Spectrometry Update—Environmental AnalysisJournal of Analytical Atomic Spectrometry, 1991
- Data analysis of heavy metal pollution in the sea by using principal component analysis and partial least squares regressionChemometrics and Intelligent Laboratory Systems, 1989
- Microwave digestion technique for the extraction of minerals from environmental marine sediments for analysis by inductively coupled plasma atomic emission spectrometry and atomic absorption spectrometryJournal of Analytical Atomic Spectrometry, 1989
- Application of pattern recognition to speciation data of heavy metals in suspended particulates of urban airJournal of Chemometrics, 1989
- Principal component analysis for the identification of pollution sources in mussel survey by trace metalsEuropean Food Research and Technology, 1987
- Simultaneous multi-element analysis by continuum source atomic-absorption spectrometry with graphite probe electrothermal atomisationThe Analyst, 1985
- Simultaneous multielement atomic absorption spectrometry with graphite furnace atomizationSpectrochimica Acta Part B: Atomic Spectroscopy, 1984
- Continuum-source atomic-absorption spectrometry: past, present and future prospects. Plenary lectureThe Analyst, 1984
- FANES (furnace atomic nonthermal excitation spectrometry)—a new emission technique with high detection powerSpectrochimica Acta Part B: Atomic Spectroscopy, 1981
- Background-corrected simultaneous multielement atomic absorption spectrometerAnalytical Chemistry, 1979