Voltage-Boosted Current-Mode Wireless Power Receiver for Directly Charging a Low-Voltage Battery in Implantable Medical Systems
- 8 October 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (11) , 8860-8865
Abstract
A resonant current-mode receiver is studied to charge low-voltage batteries wirelessly for supplying medical implantable systems. To increase efficiency, the root-mean-square (RMS) current in the LC tank of the receiver (RX) is reduced by using a voltage-boosted current-mode (VBCM) receiver. This receiver combines the conventional current-mode receiver with a switched-capacitor converter to boost the voltage instantaneously at the switching node ( $V_X$ ) of coil. Owing to the suggested technique, the receiver directly charges a low-voltage battery while maintaining a small RMS current without using a complex voltage regulator. The receiver achieves an efficiency as high as 84.7% with a 1.1 V battery while operating at the resonant frequency ( $f_{reso}$ ) of 6.78 MHz. The power delivered to the output ( $P_{o}$ ) is in the range from 1.5 mW to 50 mW. The VBCM receiver was fabricated by 180 nm CMOS technology with a total active area of $\rm0.22 mm^2$
Keywords
Funding Information
- National Research Council of Science and Technology
- MSIT
- National Research Foundation of Korea (NRF-2017R1C1B5074495)
This publication has 14 references indexed in Scilit:
- Privacy Protection for E-Health Systems by Means of Dynamic Authentication and Three-Factor Key AgreementIEEE Transactions on Industrial Electronics, 2017
- Optimal Design of a Resonance-Based Voltage Boosting Rectifier for Wireless Power TransmissionIEEE Transactions on Industrial Electronics, 2017
- A Resonant Current-Mode Wireless Power Receiver and Battery Charger With −32 dBm Sensitivity for Implantable SystemsIEEE Journal of Solid-State Circuits, 2016
- Current-Based Resonant Power Delivery With Multi-Cycle Switching for Extended-Range Inductive Power TransmissionIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- Wireless Power Transfer With Automatic Feedback Control of Load Resistance TransformationIEEE Transactions on Power Electronics, 2015
- An Adaptive Reconfigurable Active Voltage Doubler/Rectifier for Extended-Range Inductive Power TransmissionIEEE Transactions on Circuits and Systems II: Express Briefs, 2012
- Automated Impedance Matching System for Robust Wireless Power Transfer via Magnetic Resonance CouplingIEEE Transactions on Industrial Electronics, 2012
- Science and Engineering Beyond Moore's LawProceedings of the IEEE, 2012
- A Wireless Power Interface for Rechargeable Battery Operated Medical ImplantsIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2007
- Design and analysis of an adaptive transcutaneous power telemetry for biomedical implantsIEEE Transactions on Circuits and Systems I: Regular Papers, 2005