OPTIMIZATION OF THE CUTTING EDGE GEOMETRY OF COATED CARBIDE TOOLS IN DRY TURNING OF STEELS USING A FINITE ELEMENT ANALYSIS
- 21 April 2009
- journal article
- research article
- Published by Taylor & Francis in Machining Science and Technology
- Vol. 13 (1) , 36-51
Abstract
This paper investigates the effects of edge radius of a round-edge coated carbide tool on chip formation, cutting forces, and tool stresses in orthogonal cutting of an alloy steel 42CrMo4 (AISI 4142H). A comprehensive experimental study by end turning of thin-walled tubes is conducted, using advanced coated tools with well-defined cutting edge radii ranging from 5 to 68 microns. In parallel, 2-D finite element cutting simulations based on Lagrangian thermo-viscoplastic formulation are used to predict the cutting temperatures and tool-stress distributions within the tool coating and substrate. The results obtained from this study provide a fundamental understanding of the cutting mechanics for the coated carbide tool used, and can assist in the optimization of tool edge design for more complex geometries, such as chamfered edge. Specifically, the results obtained from the experiments and simulations of this study demonstrated that finite element analysis can significantly help in optimizing the design of coated cutting tools through the prediction of tool stresses and temperatures, especially within the coating layer.Keywords
This publication has 14 references indexed in Scilit:
- Influence of cutting edge radius on the wear resistance of PM-HSS milling insertsWear, 2005
- A finite element analysis of orthogonal machining using different tool edge geometriesJournal of Materials Processing Technology, 2004
- Slip-line modeling of machining with a rounded-edge tool—Part I: new model and theoryJournal of the Mechanics and Physics of Solids, 2003
- Application of an Internally Consistent Material Model to Determine the Effect of Tool Edge Geometry in Orthogonal MachiningJournal of Manufacturing Science and Engineering, 2002
- Effect of the Cutting Edge Radius and its Manufacturing Procedure, on the Milling Performance of PVD Coated Cemented Carbide InsertsCIRP Annals, 2002
- Challenges facing surface engineering technologies in the cutting tool industryVacuum, 2000
- Effect of Tool Edge Geometry on Workpiece Subsurface Deformation and Through-Thickness Residual Stresses for Hard Turning of AISI 52100 SteelJournal of Manufacturing Processes, 2000
- Fatigue failure mechanisms of multi- and monolayer physically vapour-deposited coatings in interrupted cutting processesSurface and Coatings Technology, 1998
- Tool-life reliability of cermet inserts in milling testsJournal of Materials Processing Technology, 1998
- New Developments in the Theory of the Metal-Cutting Process: Part I. The Ploughing Process in Metal CuttingJournal of Engineering for Industry, 1960