Agrofillers in polypropylene composites: A relationship between the density and the mechanical properties
- 30 March 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 117 (1) , 400-408
Abstract
One of the most interesting properties of agrofilled polymer composites is their light weight. Polypropylene composites containing six different agrofillers were prepared in a mixer, and their properties were examined in terms of the density of the fillers and composites. The densities of the composites increased with the level of filler but did not show a direct relationship with the density of the fillers used. This probably happened because of the different degrees of filler densification during processing. The composites showed decreased tensile strength and increased elastic modulus with filler loads, and the specific mechanical properties showed similar trends. However, the addition of maleated polypropylene improved the tensile strength and decreased the density; this improved the specific properties of the composites filled with cane, wood, and bamboo. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 21 references indexed in Scilit:
- Quercus suber and Betula pendula outer barks as renewable sources of oleochemicals: A comparative studyIndustrial Crops and Products, 2009
- The effect of types of maleic anhydride-grafted polypropylene (MAPP) on the interfacial adhesion properties of bio-flour-filled polypropylene compositesComposites Part A: Applied Science and Manufacturing, 2007
- Predicting the elastic modulus of natural fibre reinforced thermoplasticsComposites Part A: Applied Science and Manufacturing, 2006
- Lightweight laminate composites made from kenaf and polypropylene fibresPolymer Testing, 2006
- Investigation of stochastic properties of the natural fiber matsComposites Science and Technology, 2005
- Two technologies merge: wood plastic compositesPlastics, Additives and Compounding, 2004
- The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 – polyester resin matrixComposites Science and Technology, 2004
- Mechanical properties of continuous natural fibre-reinforced polymer compositesComposites Part A: Applied Science and Manufacturing, 2004
- Woodflour as Reinforcement of PolypropyleneMaterials Research, 2002
- Development and characterization of a HDPE-sand-natural fiber compositeComposites Part B: Engineering, 1997