Sustainable Thermoplastic Textile Composites Reinforced With Reused Post‐Consumer Denim Fabric: Effects of PLA and PP Matrices on Mechanical Performance and Environmental Durability
Open Access
- 8 September 2026
- journal article
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (11) , 8022-8034
Abstract
The increasing generation of textile waste and the growing demand for sustainable materials have made the development of polymer composites reinforced with reused post‐consumer textiles an important research area in recent years. In this study, sustainable thermoplastic textile composites reinforced with polylactic acid (PLA)/reused post‐consumer denim fabric (RDF) and polypropylene (PP)/reused post‐consumer denim fabric (RDF) were fabricated and characterized. Composite laminates were produced using the hot‐pressing (compression molding) method, an industrially applicable and scalable manufacturing technique, without the use of chemical surface treatments or compatibilizer additives. The effects of matrix polymer selection and textile reinforcement architecture on the mechanical performance and environmental durability of the composites were systematically investigated through tensile, flexural, impact, and moisture absorption tests. The results revealed that PLA/RDF composites exhibited higher stiffness, with an elastic modulus of approximately 8.63 GPa, but displayed more brittle mechanical behavior. In contrast, PP/RDF composites exhibited higher tensile strength (33.9 MPa) and significantly greater ductility. Charpy impact tests showed that PLA/RDF composites exhibited a higher average impact energy (0.8513 J) than PP/RDF composites (0.7032 J). Moisture absorption tests demonstrated that both composite systems exhibited significant hydrophilic behavior, with a mass increase of approximately 12%–15% after 3 weeks. These findings highlight the potential of reused post‐consumer denim fabric as a sustainable reinforcement material for the development of scalable thermoplastic composite structures with enhanced mechanical performance and environmental durability.Keywords
This publication has 49 references indexed in Scilit:
- Natural Fiber Composites Under Dynamic Loading: A Comprehensive Review of Mechanical Performance and Structural IntegrityEngineering Reports, 2026
- Processing and Structure–Property Relationships of Green Composites2026
- Sustainability and Recycling of Textile Reinforced Composites2025
- Interfacial Mechanisms and Performance of Injection‐Molded Plant Fiber/Polypropylene Composites for Automotive ApplicationsPolymer Composites, 2025
- Investigating energy absorption and crack propagation in natural rubber–epoxy composites: design, fabrication, and fracture analysisPolymer Bulletin, 2025
- Enhancing sustainability: Composite materials from recycled HDPE and denim fillersPolymer Engineering & Science, 2025
- Recent developments in the mechanical properties and recycling of fiber‐reinforced polymer compositesPolymer Composites, 2024
- Natural Plant Fiber‐Based Materials for Packaging Applications – A Review of Recent Innovations and DevelopmentsAdvanced Materials Technologies, 2024
- A review of the fabrication methods and mechanical behavior of continuous thermoplastic polymer fiber–thermoplastic polymer matrix compositesPolymer Composites, 2022
- Sustainable recycling technologies for thermoplastic polymers and their composites: A review of the state of the artPolymer Composites, 2022