Texture development and Monte-Carlo simulation of microstructure evolution in pure Zr grain-refined by equal channel angular pressing
Authors:
- 11 January 2005
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 85 (2-3) , 345-371
Abstract
The evolution of the grain boundary character distribution (GBCD) of severely deformed commercial purity Zr was studied by experiment as well as computer simulation. The severe plastic deformation was performed by equal channel angular pressing (ECAP) at 350°C using a die with 90°/20°. Through a repetitive operation, it was possible to reduce the grain size of specimens from 20 µm to about 300 nm with high angle grain boundaries. During the severe deformation, a strong texture developed in specimens, which could be traced through a viscoplastic self-consistent (VPSC) model. Combination of prism slips and mechanical twinning were presumed to operate during the severe deformation that was predominantly shear in character. Grain growth kinetics of severely deformed specimens were studied by optical microscopy as well as by Monte-Carlo computer simulation, which showed a grain growth exponent, n, ranging from 0.25 to 0.44. For the computer simulation, a direct mapping method was developed such that the orientation image map (OIM) obtained by electron back scattered diffraction (EBSD) was digitized and planted into the simulation microstructure grid. The grain growth, which can be characterized as normal growth, was accompanied by unaltered distribution characteristics of the boundary misorientation angles and tenacious trait of the texture.Keywords
This publication has 50 references indexed in Scilit:
- Severe plastic deformation: simple shear versus pure shearMaterials Science and Engineering: A, 2002
- Influence of dilute silicon addition on the oxidation resistance and tensile properties of modified Zircaloy-4Journal of Nuclear Materials, 2002
- Texture dependent plastic behavior of Zr 702 at large strainJournal of Nuclear Materials, 2001
- Effect of die angle on the deformation texture of copper processed by equal channel angular extrusionMaterials Science and Engineering: A, 2001
- Influence of ECAP routes on the microstructure and properties of pure TiMaterials Science and Engineering: A, 2001
- Observations and issues on mechanisms of grain refinement during ECAP processMaterials Science and Engineering: A, 2000
- Microstructure and texture evolution in ECAE processed A5056Materials Science and Engineering: A, 2000
- A Monte-Carlo approach of domain switching in ferroelectric Potts lattice under external electric fieldMaterials Letters, 1998
- An investigation of ductility and microstructural evolution in an Al−3% Mg alloy with submicron grain sizeJournal of Materials Research, 1993
- Geometrically necessary, incidental and subgrain boundariesScripta Metallurgica et Materialia, 1991