Is a Zirconia Dental Implant Safe When It Is Available on the Market?
Open Access
Abstract
The market share of zirconia (ZrO2) dental implants is steadily increasing. This material comprises a polymorphous character with three temperature-dependent crystalline structures, namely monoclinic (m), tetragonal (t) and cubic (c) phases. Special attention is given to the tetragonal phase when maintained in a metastable state at room temperature. Metastable tetragonal grains allow for the beneficial phenomenon of Phase Transformation Toughening (PTT), resulting in a high fracture resistance, but may lead to an undesired surface transformation to the monoclinic phase in a humid environment (low-temperature degradation, LTD, often referred to as ‘ageing’). Today, the clinical safety of zirconia dental implants by means of long-term stability is being addressed by two international ISO standards. These standards impose different experimental setups concerning the dynamic fatigue resistance of the final product (ISO 14801) or the ageing behavior of a standardized sample (ISO 13356) separately. However, when evaluating zirconia dental implants pre-clinically, oral environmental conditions should be simulated to the extent possible by combining a hydrothermal treatment and dynamic fatigue. For failure analysis, phase transformation might be quantified by non-destructive techniques, such as X-Ray Diffraction (XRD) or Raman spectroscopy, whereas Scanning Electron Microscopy (SEM) of cross-sections or Focused Ion Beam (FIB) sections might be used for visualization of the monoclinic layer growth in depth. Finally, a minimum load should be defined for static loading to fracture. The purpose of this communication is to contribute to the current discussion on how to optimize the aforementioned standards in order to guarantee clinical safety for the patients.Keywords
This publication has 32 references indexed in Scilit:
- Low-temperature degradation in zirconia with a porous surfaceActa Biomaterialia, 2011
- Quantitative Analysis of Monoclinic Phase in 3Y‐TZP by Raman SpectroscopyJournal of the American Ceramic Society, 2010
- Experimental Determination of the Raman Sampling Depth in Zirconia CeramicsApplied Spectroscopy, 2009
- Low-Temperature Degradation of Zirconia and Implications for Biomedical ImplantsAnnual Review of Materials Research, 2007
- Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconiaBiomaterials, 2006
- The wear of dental amalgam in an artificial mouth: a clinical correlationDental Materials, 1985
- Calibration Curve for Quantitative Analysis of the Monoclinic-Tetragonal ZrO2System by X-Ray DiffractionJournal of the American Ceramic Society, 1984
- Effect of stress-induced phase transformation on the properties of polycrystalline zirconia containing metastable tetragonal phaseJournal of Materials Science, 1978
- Ceramic steel?Nature, 1975
- Phase Analysis in Zirconia SystemsJournal of the American Ceramic Society, 1972