Synergistic Effects of Stabilizing the Surface Structure and Lowering the Interface Resistance in Improving the Low-Temperature Performances of Layered Lithium-Rich Materials
- 28 February 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (10) , 8641-8648
Abstract
The layered lithium-rich cathode material, Li1.2Ni0.2Mn0.6O2, was successfully synthesized by a sol–gel method followed by coating with different amounts of Li2O-2B2O (LBO, 1, 3, and 5 wt %). The effects of LBO-coating layer on the structure, morphology, and low-temperature (−30 °C) electrochemical properties of these materials are investigated systematically. The morphology, crystal structure, and grain size of the Li-rich layered oxide are not essentially changed after surface modification; according to the TEM results, the Li–B–O coating layer exists as an amorphous layer with a thickness of 5–8 nm when the amount is 3 wt %. Electrochemistry tests reveal that 3 wt % LBO-coated samples present the best electrochemical capability at low temperature. At −20 °C, the 3 wt % LBO-coated sample could retain 45.7% of the initial discharge capacity (131.7/288.0 mAh g–1) of that at 30 °C, while the pristine material could only retain 22.5% (57.5/256.0 mAh g–1). XPS spectra and EIS results reveal that such an enhancement of low-temperature discharge capacity should be attributed to the proper LBO-coating layer, which not only endows the modified materials with more stable surface structure but also lowers the interface resistance of Li+ diffusion through the interface and charge transfer reaction.Keywords
Funding Information
- Program for New Century Excellent Talents in University (NCET-13-0044)
- Ministry of Science and Technology of the People's Republic of China (2016YFB0100301)
- National Natural Science Foundation of China (21573017, 51472032)
This publication has 42 references indexed in Scilit:
- Temperature dependence of the initial coulombic efficiency in Li-rich layered Li[Li0.144Ni0.136Co0.136Mn0.544]O2 oxide for lithium-ions batteriesJournal of Power Sources, 2014
- Hierarchical Li1.2Ni0.2Mn0.6O2 Nanoplates with Exposed {010} Planes as High‐Performance Cathode Material for Lithium‐Ion BatteriesAdvanced Materials, 2014
- K+-Doped Li1.2Mn0.54Co0.13Ni0.13O2: A Novel Cathode Material with an Enhanced Cycling Stability for Lithium-Ion BatteriesACS Applied Materials & Interfaces, 2014
- Direct In situ Observation of Li2O Evolution on Li-Rich High-Capacity Cathode Material, Li[NixLi(1–2x)/3Mn(2–x)/3]O2 (0 ≤ x ≤0.5)Journal of the American Chemical Society, 2013
- Challenges Facing Lithium Batteries and Electrical Double‐Layer CapacitorsAngewandte Chemie International Edition, 2012
- Electrochemical kinetics of the 0.5Li2MnO3·0.5LiMn0.42Ni0.42Co0.16O2 ‘composite’ layered cathode material for lithium-ion batteriesRSC Advances, 2012
- Detailed Studies of a High-Capacity Electrode Material for Rechargeable Batteries, Li2MnO3−LiCo1/3Ni1/3Mn1/3O2Journal of the American Chemical Society, 2011
- Building better batteriesNature, 2008
- Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion BatteriesChemistry Letters, 2001
- Li CoO2 (0<x⩽1): A new cathode material for batteries of high energy densitySolid State Ionics, 1981