Anisotropic and Smooth Inductively Coupled Plasma Etching of III-V Laser Waveguides Using HBr-O[sub 2] Chemistry
- 1 January 2008
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 155 (10) , H778-H785
Abstract
HBr inductively coupled plasma (ICP) etching is investigated to realize ridge laser waveguides on InP and GaAs substrates. It has been reported that pure HBr chemistry leads to undercut ridge profiles when a hard dielectric mask is used. In this paper we show that a passivation layer can build up on the sidewalls and prevent lateral etching at high ICP powers if a Si wafer is used as the sample tray. Ex situ energy-dispersive X-ray analysis coupled to transmission electron microscopy shows that the passivation layer is a Si-rich silicon oxide. Vertical sidewalls, a smooth etched surface, and a moderate etch rate compatible with the processing of shallow ridge lasers can be obtained for InP-based heterostructures. The optimized HBr etching process is used to etch InAs quantum dot shallow ridge lasers grown on InP(100) substrate and compared to a classical HCl selective chemical etch. The waveguide losses of the HBr-etched waveguide do not differ from those of the chemically etched waveguide by more than 1cm−11cm−1 . Finally, we show that a similar passivation mechanism can be obtained during HBr ICP etching of GaAs∕AlGaAsGaAs∕AlGaAs ridge waveguides, demonstrating that the same HBr (−O2)(−O2) chemistry is suitable for both GaAs and InP systems.Keywords
This publication has 13 references indexed in Scilit:
- Sidewall passivation assisted by a silicon coverplate during Cl2–H2 and HBr inductively coupled plasma etching of InP for photonic devicesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2008
- Inductively Coupled Plasma Etching of InP with HBr∕O[sub 2] ChemistryJournal of the Electrochemical Society, 2008
- Optimization of a Cl2–H2 inductively coupled plasma etching process adapted to nonthermalized InP wafers for the realization of deep ridge heterostructuresJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2006
- Etching Characteristics of HBr-Based Chemistry on InP Using the ICP TechniqueJournal of the Electrochemical Society, 2004
- ICP etching of InP and related materials using photoresist as mask2004
- X-ray photoelectron spectroscopy investigation of sidewall passivation films formed during gate etch processesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2001
- Bromine ion-beam-assisted etching of InP and GaAsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1998
- A novel electrostatic probe method for ion flux measurementsPlasma Sources Science and Technology, 1996
- Characteristics of III‐V Dry Etching In HBr ‐ Based DischargesJournal of the Electrochemical Society, 1992
- Reactive ion etching of InP with Br2-containing gases to produce smooth, vertical walls: Fabrication of etched-faceted lasersApplied Physics Letters, 1989