Effect of mixing history on phase morphology of a polyalloy and a polyblend
Authors:
- J. E. CurryJCJ. E. Curry
- J. StaritaJSJ. Starita
- 1 May 1989
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 29 (10) , 617-624
Abstract
This paper details some of the immediate findings for phase morphology formation and persistence in an industrial melt mixing of a polyblend/alloy (‘PB’/‘PBA’). Estimation of the minor phase domain size in a polyblend is feasible if the viscoelasticity functions, interfacial tension of the component‐polymers, and the mixing process shear stress level are available. Clusters of domains are formed in the mixer (following streamlines). During steady flow in capillaries the clusters are forming rings which result from the flow velocity profile. Quantitative description of the clusters requires an expansion of image analysis software to account for the interdomain spacing in the clusters, as well as for their pattern. The on‐line rheometry was found useful for monitoring coalescence and the effectiveness of the compatibilizer: higher “stiffness” of the PAB melt compared with that of PB shows up in measurements of complex viscosity and modulus. Further study is required, however, for correlating domain spacing and the real time rheometry data (esp. the relaxation spectrum plateau [13]). Finally, the study of phase morphology for the “model” polyblend provides an insight into the melt deformation history in an industrial mixer. It is expected that the distribution of domain sizes would correlate with the pass frequency in the mixing blocks [41], stress distribution in the extruder, and coalescence of the dispersed (“minor”) phase.Keywords
This publication has 21 references indexed in Scilit:
- Extruder scale‐up in a corotating twin‐screw extrusion compounding processAdvances in Polymer Technology, 1986
- Effect of rheological parameters on phase morphology of poly blends: A route to computer aided design and development of industrial polyblendsPolymer Engineering & Science, 1986
- Development of phase morphology in incompatible polymer blends during mixing and its variation in extrusionPolymer Engineering & Science, 1984
- Modification of polyolefins. XXIII. Melt rheology of polypropylene‐LDPE blends: Dependence on the mixing process—a tentative evaluationAdvances in Polymer Technology, 1984
- High density polyethylene/polystyrene blends: Phase distribution morphology, rheological measurements, extrusion, and melt spinning behaviorJournal of Applied Polymer Science, 1984
- Viscoelastic properties of rubber-modified polymeric materials at elevated temperatures1984
- Melt rheology of polymer blends the morphology feedbackPolymer Engineering & Science, 1983
- Collaborative research on polymeric materials through IUPAC1983
- Development of industrial polyolefin blends using melt rheology dataPolymer Engineering & Science, 1982
- Heterogeneous Blends of Polymers. Rheology and MorphologyRubber Chemistry and Technology, 1976